Lorex D861 Series, Руководство пользователя

Страница: 64 / 122

Using the Main Menu 15
2. Click
EVENTS
. Click the
Warning
tab on the side panel, then
HardDisk
on the top panel.
3. Choose the event type you want to set preferences for:
• No Disk: No hard drive detected.
•
Disk Error:
A hard drive error has been detected.
• Disk Full: The hard drive is full or almost full. Enter the percentage of disk space remain-
ing that will trigger a warning next to Less Than . Disk Full warnings will not occur if hard
drive overwrite is enabled.
• All: Configure warnings for all hard drive events.
4. Click to enable ( ) / disable ( ) the selected event type.
5. Choose how the system will react when the selected event occurs:
• Show Message: Error message will appear on the recorder’s display.
•
Buzzer:
The recorder will sound an audible alarm.
• Send Email: Send an email notification with details on the event (requires email configura-
tion — see 15.7.3 Configuring Email Alerts , page 68 for details).
6. Click Apply .
To set preferences for network events:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu .
2. Click EVENTS . Click the Warning tab on the side panel, then Network on the top panel.
3. Choose the event type you want to set preferences for:
• Offline: The system has lost connection to the network.
• IP Conflict: More than one device on your network has the same IP address.
•
MAC Conflict:
More than one device on your network has the same MAC address.
• All: Configure warnings for all network events.
#LX400111; r. 5.0/56647/56647; en-US 56