54
User manual
10.9. Seat tilt malfunction
• Every month it is important to check that the two bump stops are in good condition.
• Every month it is important to check that they are both in contact when the seat incline is at its maximum
• If this is not the case, contact your authorized Logo Silver dealer to change the stoppers and / or their setting.
Warning
Do not attempt to adjust and / or change these stoppers yourself, you may cause the maximum incline of the seat to malfunction and
you risk tipping your chair over.
• If your seat leans too far forward and parts come into contact with your body, you must adjust the position of the front
attachment of the seat cylinder.
Seat tilt bump stops
Seat cylinder front attachment
10.10. Caster (optional) malfunction
• If the front wheels rotate while the casters are out, the left switch may be disconnected and / or incorrectly adjusted. It
is also possible that the relays need to be changed.
• If the speed limit is at 2.5 km / h when your casters are fully retracted, it is possible that the right switch is disconnected
and / or incorrectly adjusted.
• If you are not limited to 2.5km / h when your casters are out, do not use a speed higher than this one and contact us.
• All repairs to switches and relays must be performed by an authorized Silver Logo dealer.
Right Switch
Left Switch
