21
4 Installation
4.2 Environmental and Operating Conditions
– The equipment should be installed in a dry, well ventilated and dust-free place.
– To ensure proper ventilation, install the unit at a distance of at least 100 – 150 mm from
a wall or neighbouring object.
– Remove any remaining packaging material and clean UVALOC 1000 with
an
ammonium
chloride free
cleaner. Allow time for complete evaporation.
4.3 Connecting the Unit
Make sure to provide a stable power supply of nominal 240 V AC 50/60 Hz, the minimum
requirement is 220 V AC, 50/60 Hz.
Connect power cord to the power supply.
Connect 6 mm pneumatic hose to compressed air supply (4-6 bar).
Connect foot switch to Interface XS1 on the rear panel of the unit.
Connect data cable (15 pin Sub D) to XS3 on the lamp housing and to the cure
chamber.
Connect power supply line to XS4 on the lamp housing and to the cure chamber.
4.4 Installation of the Bulb
Unlock and open the drawer.
CAUTION!
Do not touch the glass bulb of the UV lamp. Because of burned-in fingerprints the lifetime
of the bulb will be reduced considerably. Fingerprints can be removed with a lint free
wipe and pure alcohol.
Open reflector flap.
Insert new bulb
Close reflector flap.
Close drawer and lock in place.
Содержание 97055
Страница 1: ......
Страница 79: ...79 Publikationsnummer Publication No 8954597 Ausgabe Version 03 2014 ...
Страница 80: ......