Liquid Controls LectroCount LCR-II E3657 Series, Руководство по установке

Страница: 7 / 21

12 13
MeTer sysTeM overvIeW
Epson Slip Printer Epson Roll Printer
Remote Display
POD Pulser
∆P Transducer
DMS
Lap Pad
Meter system Components
Pulse ouTPuT devICe
The Liquid Controls Pulse Output Device (POD pulser)
converts the rotary motion of a positive displacement
flowmeter into electronic pulses. POD pulsers can be
used in place of an internal pulser. They are ideal for
applications that require explosion proof components in
which the LectroCount LCR-II register is installed at a
distance from the meter. The POD pulser requires hard
wired data communication with the LectroCount LCR-II.
See manual EM300-11.
DifferenTiAl Pressure (∆P) TrAnsDuCer
The differential pressure transducer, common in
aviation applications, monitors the differential pressure
(pressure drop) across a full flow fuel monitor/water
coalescer. The highest differential pressure reached
during the custody transfer will then be printed on the
ticket. Using interlocks, the LectroCount LCR-II can
shut down a custody transfer if the differential pressure
meets a preprogrammed differential pressure shutdown
value. The ∆P Transducer requires hard wired data
communication with the LectroCount LCR-II. See
manual EM300-40.
daTa ManaGeMenT sysTeM
The DMS is an in-cab computer with a heavy duty lap
pad interface. The DMS streamlines the flow of data
between the LCR-II and back office accounting software.
The DMS must be hard wired to the LectroCount LCR-II.
See manuals EM200-10 and EM200-11.
laP Pad
The lap pad programs and displays all operational
functions of the LectroCount LCR registers. It has a
large, tactile, alpha-numeric keyboard and a dual line,
backlit display. A 3-terminal lap pad adapter is provided
with each lap pad. The adapter provides a junction for
the lap pad, the printer, and the LCR printer cable.
xl led reMoTe dIsPlay
The XL LED Remote Display’s six 2¼” high digits, each
consisting of 18 red LED lights, are discernible from up
to 250 feet away. Hard wire data communication with the
LectroCount LCR-II is required. See manual EM300-55.
PrInTers
Printers print delivery tickets to provide a physical record
of custody transfers. The Epson slip printer is considered
the industry standard for many applications. Multi-
layered tickets are available to provide a physical record
for both customers and business records. The Epson roll
printer is ideal for recording multiple custody transfers
over an extended time frame.
InsTallaTIon overvIeW
Installation overview
If the LectroCount LCR-II was ordered as part of a meter system, it will arrive mounted on the meter and prewired to
the ETVC probe, air eliminator, and valve.
Installation overview for lCr-II ordered with meter system:
1. Ground truck seat cushion. page 12
2. Install meter system onto truck or fixed installation. refer to meter manual
3. Run the LCR-II’s data and power cable to truck cab or power supply. page 17
4. Connect any additional components to the LCR-II’s CPU board.
5. Mount printer and connect printer data cable. page 27
6. Connect the LCR-II and the printer to power supply. page 29
7. Setup and calibrate the LCR-II.
refer to manual EM150-11
If you are replacing an existing register, you must mount the register onto the meter and make the proper connections
to all of the components.
Installation overview for lCr-II ordered without meter system:
1. Ground truck seat cushion.
page 12
2. Mount the LCR-II to the meter. page 14
3. Run the LCR-II’s data and power cable to truck cab or power supply. page 17
4. Connect all components to the LCR-II’s CPU board.
5. Mount printer and connect printer data cable.
page 27
6. Connect the LCR-II and the printer to power supply.
page 29
7. Setup and calibrate the LCR-II.
refer to manual EM100-11
.
Before installation, check your shipment against the
packing list and ensure that no parts are missing. The
packing list is inside the red information packet along with
the Installation and Operation Manuals.
Check Each Shipment
Specific installation requirements will vary with the model of the truck, the physical layout
of a fixed installation, the configuration of any existing metering equipment, the options
selected, and the type of fluid being metered
Installation Requirements Vary
This manual explains and details the mechanical installation of the
LectroCount LCR-II and the temperature probe as well as the electrical and
data installation of all components that connect to the LCR-II. For additional
installation information, refer to the manuals of the other components. All
manuals are available at www.lcmeter.com.
This Manual Includes