Lipco GSG-S-VM, Перевод оригинальной инструкции

Страница: 46 / 72

Instructions Saddle-mount unit GSG-S-VM
46 - 72 010710-03-EN BA GSG-S-VM / 13.07.2020
20. Preparation of spraying liquid
•
Prepare only the quantity of plant protection agent needed.
•
Fill approximately 75% of the calculated water quantity in the
spray liquid tank.
When filling with water from the drinking water supply, do not
immerse water hose in the spray liquid.
Surface water may be used only after obtaining official permis-
sion and if measures are taken to prevent contamination.
The spraying liquid tank can also be filled via an optionally avail-
able external suction unit.
•
Each spray liquid tank is equipped with two hydraulic mixing unit
to keep the spraying liquid in motion and prevent settling.
Hydraulic agitator:
The hydraulic agitators are
switched on from the tractor
via the electric control box.
(Fig. 25)
Fig. 25
If the tank is partially empty,
one agitator can be shut off
manually via manual shut-off
valve. (Fig. 26)
Shut-off valve
Fig. 26