Lipco GSG-S-VM, Перевод оригинальной инструкции

Страница: 23 / 72

Instructions
Saddle-mount unit GSG-S-VM
23 - 72 010710-03-EN BA GSG-S-VM / 13.07.2020
14. Preparation
In order to ensure safety and efficiency when operating the
GSG-S-
VM the following tasks must be done prior to starting work:
•
Check the harvester according to manufacturer's instructions -
see the manufacturer's operating instructions.
•
Pumpendurchtrieb:
•
Pump drive shaft must be cov-
ered on back side with protec-
tive cap.
(Fig. 12)
Protective cap
Fig. 12
•
Always replace or install any damaged or missing components
before operating the machine!
•
Check to make sure that all bolts are tightened.
•
Check the hydraulic lines for damage and replace, if necessary,
according to the regulations of the trade association.