![background image](http://html1.mh-extra.com/html/linksys/rvl200/rvl200_user-manual_1924696055.webp)
42
Chapter 5: Setting Up and Configuring the Router
Port Management Tab - Port Setting
4-Port SSL/IPSec VPN Router
Port Management Tab - Port Setting
On this screen, select the mode and configure the Port VLAN Identifier (PVID) for each LAN port of the Router.
Port Setting
Port ID. The Router’s LAN ports are numbered 1 to 4.
Mode. You have a choice of three modes: General, Access (default), and Trunk. For a General port, the transmitted
frames can be tagged or untagged, and it will be defined on the
VLAN Membership
screen. For an Access port,
the transmitted frames will be untagged. A port configured as a Trunk port acts as a direct link between two
switches. The transmitted frames will be tagged to identify the source VLAN, but the frames belonging to the
default VLAN will be untagged.
PVID. Enter the PVID assigned to untagged frames received on the interface. The default is
1
.
Click the
Save Settings
button to save your changes, or click the
Cancel Changes
button to undo your changes.
Figure 5-39: Port Management Tab - Port Setting
Содержание RVL200
Страница 170: ...157 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router ...
Страница 171: ...158 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router ...
Страница 172: ...159 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router ...
Страница 173: ...160 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router For more information visit www linksys com ...