![background image](http://html1.mh-extra.com/html/linksys/rvl200/rvl200_user-manual_1924696032.webp)
19
Chapter 5: Setting Up and Configuring the Router
System Summary Tab
4-Port SSL/IPSec VPN Router
System Summary Tab
The first screen that appears is the System Summary tab, which displays the Router’s current status and settings.
This information is read-only. Underlined text is hyperlinked to related setup pages, so if you click a hyperlink, the
related setup screen will appear. On the right-hand side of this screen and all other screens of the Utility is a link
to the Site Map, which has links to all of the Utility’s tabs. Click the
Site Map
button to view the Site Map. Then,
click the desired tab.
System Information
Serial Number. Displayed here is the serial number of the Router.
Firmware version. Displayed here is the current version number of the firmware installed on the Router.
CPU. Displayed here are the type and speed of the processor installed on the Router.
DRAM. Displayed here is the size of DRAM installed on the Router’s motherboard.
Flash. Displayed here is the size of flash memory installed on the Router’s board.
System Up Time. This is the length of time in days, hours, and minutes that the Router has been active. The
current time and date are also displayed.
Port Statistics
Click any port on the Router’s rear panel image to see the status of the selected port. If the port is disabled, it will
be red; if enabled, it will be black. If the port is connected, it will be green. Information about the selected port
will appear in a separate window. The port’s Summary table will show the settings of the selected port, including
Type, Interface, Link Status, Port Activity, Priority, Speed Status, Duplex Status, and Auto negotiation. For the
selected port, the statistics table will show this information: number of packets received, number of packet bytes
received, number of packets transmitted, number of packet bytes transmitted, and number of packet errors. To
update the on-screen information, click the
Refresh
button. To exit this screen, click the
Close
button.
Network Setting Status
LAN IP. It shows the current LAN IP Address of the Router, as seen by internal users on the network, and it
hyperlinks to the LAN Setting section on the Network page of the Setup tab.
WAN IP. This shows the current WAN IP address of the Router, as seen by external users on the Internet and
hyperlinks to the WAN Connection Type settings on the Network page of the Setup tab. If the port is set to
Obtain
an IP automatically
, two buttons,
Release
and
Renew
, will be available. Click the
Release
button to release the IP
Figure 5-11: System Summary
Figure 5-12: Site Map
Содержание RVL200
Страница 170: ...157 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router ...
Страница 171: ...158 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router ...
Страница 172: ...159 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router ...
Страница 173: ...160 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router For more information visit www linksys com ...