![background image](http://html1.mh-extra.com/html/linksys/rvl200/rvl200_user-manual_1924696070.webp)
57
Chapter 5: Setting Up and Configuring the Router
VPN Tab - Gateway to Gateway
4-Port SSL/IPSec VPN Router
Remote Group Setup
Before you configure the Remote Group Setup, make sure your VPN tunnel will have two different IP subnets. For
example, if the local 4-Port SSL/IPSec VPN Router has an IP scheme of 192.168.1.x (x being a number from 1 to
254), then the remote VPN router should have a different IP scheme, such as 192.168.2.y (y being a number from
1 to 254). Otherwise, the IP addresses will conflict, and the VPN tunnel cannot be created.
Remote Security Gateway Type
The default is
IP Only
. Only the computer with a specific IP address will be able to access the tunnel. If you know
the static IP address of the remote VPN device at the other end of the tunnel, then complete the
IP address
field.
If you do not know the static IP address of the remote VPN device but you do know its domain name, then select
IP by DNS Resolved
, and enter the remote VPN device’s domain name on the Internet. The Router will retrieve
the IP address of the remote VPN device.
(The Remote Security Gateway Type you select should match the Local Security Gateway Type selected on the
VPN device at the other end of the tunnel.
Remote Security Group Type
Select the Remote Security Group behind the Remote Gateway that can use this VPN tunnel. Select one of these
three available types:
IP
or
Subnet
. The Remote Security Group Type you select should match the Local Security
Group Type selected on the VPN device at the other end of the tunnel.
After you have selected the Remote Security Group Type, the settings available on this screen may change,
depending on which selection you have made.
IP. If you select IP, then only the computer with a specific IP address will be able to access the tunnel. Enter
the appropriate IP address.
Subnet. If you select Subnet, which is the default, then all computers on the remote subnet will be able to
access the tunnel. Complete the
IP address
and
Subnet Mask
fields. The default Subnet Mask is
255.255.255.0
.
Содержание RVL200
Страница 170: ...157 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router ...
Страница 171: ...158 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router ...
Страница 172: ...159 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router ...
Страница 173: ...160 Appendix Q Regulatory Information 4 Port SSL IPSec VPN Router For more information visit www linksys com ...