Linksys ATA Administration Guide
117
Regional page
Accept Last Act Code
Accepts the last outbound call. It lets the call ring through when do not
disturb or call forwarding of all calls are enabled.
The default is
*64
.
Accept Last Deact Code Cancels the code to accept the last outbound call.
The default is
*84
.
CW Act Code
Enables call waiting on all calls.
The default is
*56
.
CW Deact Code
Disables call waiting on all calls.
The default is
*57
.
CW Per Call Act Code
Enables call waiting for the next call.
The default is
*71
.
CW Per Call Deact Code Disables call waiting for the next call.
The default is
*70
.
Block CID Act Code
Blocks caller ID on all outbound calls.
The default is
*67
.
Block CID Deact Code
Removes caller ID blocking on all outbound calls.
The default is
*68
.
Block CID Per Call Act
Code
Blocks caller ID on the next outbound call.
The default is
*81
.
Block CID Per Call Deact
Code
Removes caller ID blocking on the next inbound call.
The default is
*82
.
Block ANC Act Code
Blocks all anonymous calls.
The default is
*77
.
Block ANC Deact Code
Removes blocking of all anonymous calls.
The default is
*87
.
DND Act Code
Enables the do not disturb feature.
The default is
*78
.
DND Deact Code
Disables the do not disturb feature.
The default is
*79
.
CID Act Code
Enables caller ID generation.
The default is
*65
.
CID Deact Code
Disables caller ID generation.
The default is
*85
.
CWCID Act Code
Enables call waiting, caller ID generation.
The default is
*25
.
CWCID Deact Code
Disables call waiting, caller ID generation.
The default is
*45
.
Dist Ring Act Code
Enables the distinctive ringing feature.
The default is
*26
Dist Ring Deact Code
Disables the distinctive ringing feature.
The default is
*46
.
Speed Dial Act Code
Assigns a speed dial number.
The default is
*74
.