Linksys ATA Administration Guide
150
PSTN Line page (AG310 and SPA3102)
Voice tab > PSTN Line page >
VoIP Users and Passwords (HTTP Authentication) section
Line 1 Fallback DP
Index of the dial plan in the dial plan pool to be used when the VoIP Caller is
calling from Line 1 of the same SPA3102 or AG310 unit due to fallback to
PSTN service when Line 1 VoIP service is down. Choose from {none, 1, 2, 3, 4,
5, 6, 7, 8}.
The default is
1
.
VoIP Caller ID Pattern
A comma-separated list of caller number templates such that callers with
numbers not matching any of these templates are rejected for PSTN gateway
service, regardless of the setting of the authentication method. The
comparison is applied before the access list is applied. If this parameter is
blank (not specified), all callers are considered for PSTN gateway service.
For example: 1408*, 1512???1234.
Note: ‘?’ matches any single digit; ‘*’ matches any number of digits.
The default is blank.
VoIP Access List
A comma separated list of IP address templates, such that callers with source
IP address matching any of the templates will be accepted for PSTN gateway
service without further authentication. For example: 192.168.*.*,
66.43.12.1??.
The default is blank.
VoIP Caller 1/2/3/4/5/6/
7/8 PIN
One of 8 PIN numbers that can be specified to control access to the PSTN
gateway by a VoIP Caller, when the
VoIP Caller Authentication Method
parameter is set to PIN.
The default is blank.
VoIP Caller 1/2/3/4/5/6/
7/8 DP
Index of the dial plan in the dial plan pool to be associated with the VoIP
caller who enters the PIN that matches
VoIP Caller 1/2/3/4/5/6/7/8 PIN
.
The default is
1
.
Field
Description
VoIP User 1/2/3/4/5/6/7/
8 Auth ID
The first of 8 user-id’s that a VoIP Caller can use to authenticate itself to the
SPA using the HTTP Digest method (in other words, by embedding an
Authorization header in the SIP INVITE message sent to the SPA. If the
credentials are missing or incorrect, the SPA will challenge the caller with a
401 response). The VoIP caller whose authentication user-id equals to this ID
is referred to VoIP User 1 of this SPA.
Note: If the caller specifies an authentication user-id that does not match any
of the VoIP User Auth ID’s, the INVITE will be rejected with a 403 response.
The default is blank.
VoIP User 1/2/3/4/5/6/7/
8 DP
Index of the dial plan in the dial plan pool to be used with VoIP User 1.
The default is
1
.
VoIP User 1/2/3/4/5/6/7/
8 Password
The password to be used with VoIP User 1. The user assumes the identity of
VoIP User 1 must therefore compute the credentials using this password, or
the INVITE will be challenged with a 401 response
The default is blank.
Field
Description