Linksys ATA Administration Guide
112
Regional page
Voice tab > Regional page >
Distinctive Ring Patterns section
VoIP PIN Tone
Specification of the tone played to prompt a VoIP caller for a PIN number (if
PIN authentication is selected and the caller requires authentication to use
the PSTN gateway). This setting applies to the SPA3102 only.
The default is
600@-10;*(0/1/1,.1/.1/1,.1/.1/1,.1/.5/1)
.
PSTN PIN Tone
Specification of the tone played to prompt a PSTN caller for a PIN number (if
PIN authentication is selected and the caller requires authentication to use
the VoIP gateway). This setting applies to the SPA3102 only.
The default is
600@-10;*(0/.7/1,.2/.1/1,.2/.1/1,.2/.5/1)
.
Feature Invocation Tone Played when a feature is implemented.
The default is
350@-16;*(.1/.1/1)
.
This field is not found in the PAP2T.
Field
Description
Ring1 Cadence
Cadence script for distinctive ring 1.
The default is
60(2/4)
.
Ring2 Cadence
Cadence script for distinctive ring 2.
The default is
60(.3/.2, 1/.2,.3/4)
.
Ring3 Cadence
Cadence script for distinctive ring 3.
The default is
60(.8/.4,.8/4)
.
Ring4 Cadence
Cadence script for distinctive ring 4.
The default is
60(.4/.2,.3/.2,.8/4)
.
Ring5 Cadence
Cadence script for distinctive ring 5.
The default is
60(.2/.2,.2/.2,.2/.2,1/4)
.
Ring6 Cadence
Cadence script for distinctive ring 6.
The default is
60(.2/.4,.2/.4,.2/4)
.
Ring7 Cadence
Cadence script for distinctive ring 7.
The default is
60(.4/.2,.4/.2,.4/4)
.
Ring8 Cadence
Cadence script for distinctive ring 8.
The default is
60(0.25/9.75)
.
Ring9 Cadence
Cadence script for distinctive ring 9. This field is for the SPA2102 and
SPA8000 only.
The default is
60(.4/.2,.4/2)
.