![background image](http://html.mh-extra.com/html/linksys/rtp300-broadband-router-with-2-phone-ports/rtp300-broadband-router-with-2-phone-ports_administration-manual_1923888033.webp)
Linksys ATA Administration Guide
33
Using the Administration Web Server
Basic Administration and Configuration of Your Linksys ATA
c. In the
Optional Settings
section, enter the DNS server address(es) in the
Primary DNS
and
optional
Secondary DNS
fields.
For PPPoE:
a. Select
PPPoE
from the
Connection Type
drop-down menu. This is the correct setting for
most DSL users.
b. Enter the values provided by the ITSP in the following fields:
–
PPPoE Login Name
–
PPPoE Login Password
–
PPPoE Service Name
4. Click
Submit All Changes
. The Linksys ATA device reboots.
5. To verify your progress, click the
Router
tab and then click
Status
. Under
System Status
,
confirm the
WAN Connection Type
,
Current IP
,
Current Netmask
,
Current Gateway
, and
Primary
DNS
.
Registering to the Service Provider
To use VoIP phone service, you must configure your Linksys ATA device to the Service Provider.
1. Start Internet Explorer, connect to the administration web server, and choose Admin access
with Advanced settings.
2. Click
Voice tab > Line
N
, where
N
is the line number that you want to configure.
3. Enter the account information for your ITSP. The following is the minimum required
configuration to connect the ATA device to an ITSP:
•
User ID — The account number or logon name for your ITSP account (Subscriber
Information section)
•
Password — The password for your ITSP account (Subscriber Information section)
•
Proxy — The proxy server for your ITSP account (Proxy and Registration section)
4. After making any necessary changes, click the
Submit All Changes
button.
5. To verify your progress, perform the following tasks:
•
After the devices reboot, click
Voice tab > Info
. Scroll down to the
Line 1 Status
section
of the page. Verify that the line is registered. Refer to the following example.