manualshive.com logo in svg

Linksys RTP300 - Broadband Router With 2 Phone Ports, Руководство администратора

Бесплатно скачайте Руководство по быстрой установке для маршрутизатора Linksys RTP300 с 2 телефонными портами. Подробная инструкция по настройке оборудования для вашего домашнего или офисного интернета. Скачать руководство можно на сайте manualshive.com. Удобство и надежность в одном устройстве!

Поделиться
Скачать
background image

Linksys ATA Administration Guide

83

Call Scenarios

Configuring the PSTN (FXO) Gateway

VoIP to PSTN Call With and Without Authentication

This section describes three scenarios with and without authentication and includes the 
following topics:

•

”Using PIN Authentication” section on page 83

•

”Using HTTP Digest Authentication” section on page 83

•

”Without Authentication” section on page 84

Using PIN Authentication

This scenario assumes that the PSTN Line has a different VoIP account than the Line 1 account. 
The VoIP caller calls the FXO number, which auto-answers after 

VoIP Answer Delay

. The Linksys 

ATA device then prompts the VoIP caller for a PIN. When a valid PIN is entered, the SPA3102 or 
AG310 device plays the 

Outside Dial Tone 

and prompts the caller to dial the PSTN number. 

The number dialed is processed by the dial plan corresponding to the VoIP caller. If the dial plan 
choice is 0, no dial plan is needed and the user hears the PSTN dial tone right after the PIN is 
entered. If the dial plan choice is not 0, the final number returned from the dial plan after the 
complete number is dialed by the caller is dialed to the PSTN. The caller does not hear the PSTN 
dial tone (except for a little leakage before the first digit of the final number is auto-dialed by 
the Linksys ATA device).

If the PSTN Line is busy (off-hook, ringing, or PSTN line not connected) when the VoIP caller 
calls, the Linksys ATA device replies with 503. If the PIN number is invalid or entered after the 
VoIP call leg is connected, the Linksys ATA device plays the reorder tone to the VoIP caller and 
eventually ends the call when the reorder tone times out.

NOTE: 

If 

VoIP Caller ID Pattern 

is specified and the VoIP caller ID does not match any of the given 

patterns, the Linksys ATA device rejects the call with a 403. This rule applies regardless of the 
authentication method, even when the source IP address of the INVITE request is in the 

VoIP 

Access List

 .

Using HTTP Digest Authentication

The same scenario can be implemented with HTTP digest authentication when the calling 
device supports the configuration of a auth-ID and password to access the Linksys ATA device 
PSTN gateway. When the VoIP caller calls the PSTN Line, the Linksys ATA device challenges the 
INVITE request with a 401 response. The calling device should then provide the correct 
credentials in a subsequent retry of the INVITE, computed with the auth-ID and password using 
MD5. 

If the credentials are correct, the target number specified in the user-id field of the INVITE 
Request-URI is processed by the dial plan corresponding to the VoIP user (assuming the dial 
plan choice is not 0). The final number is then auto-dialed by the Linksys ATA device. 

If the credentials are incorrect, the Linksys ATA device challenges the INVITE again. If the auth-
ID does not exist in the Linksys ATA device configuration, the Linksys ATA device replies 403 to 
the INVITE. If the target number is invalid according to the corresponding dial plan, the Linksys 
ATA device also replies 403 to the INVITE. Again, if the PSTN Line is busy at the time of the call, 
the Linksys ATA device replies 503.

Содержание RTP300 - Broadband Router With 2 Phone Ports










































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RTP300 - Broadband Router With 2 Phone Ports

NEC 1000BASE-T Startup Manual preview
1000BASE-T
Бренд: NEC Страницы: 7
Paradyne 3100 Series Quick Installation preview
3100 Series
Бренд: Paradyne Страницы: 2
Tamio U1 Quick Installation Manual preview
U1
Бренд: Tamio Страницы: 2
Belkin BT-WINXPSP2 (German) Technische Handleiding preview
BT-WINXPSP2
Бренд: Belkin Страницы: 1
Lantech WL108G-PCI Quick Installation preview
WL108G-PCI
Бренд: Lantech Страницы: 14
IBM 10/100/1000 Base-T Ethernet PCI Installation And Using Manual preview
10/100/1000 Base-T Ethernet PCI
Бренд: IBM Страницы: 38
Dante Newhank DU 22 Manual preview
Newhank DU 22
Бренд: Dante Страницы: 2
Daikin BRP072B42 Installation Manual preview
BRP072B42
Бренд: Daikin Страницы: 20
IBM Gigabit Fibre Channel PCI Installation And Using Manual preview
Gigabit Fibre Channel PCI
Бренд: IBM Страницы: 52
Xylem ebro AL 126 Manual preview
ebro AL 126
Бренд: Xylem Страницы: 16
Atheros CUS227 Manual preview
CUS227
Бренд: Atheros Страницы: 39
Askey WLU5080-D4 Quick Setup Manual preview
WLU5080-D4
Бренд: Askey Страницы: 2
VOLTCRAFT SCA-100 Operating Instructions preview
SCA-100
Бренд: VOLTCRAFT Страницы: 4
ABB FEA-01 F Series User Manual preview
FEA-01 F Series
Бренд: ABB Страницы: 10
APLIC 20190307SZ226 User Manual preview
20190307SZ226
Бренд: APLIC Страницы: 16
Barrett 4000 Series Networking Manual preview
4000 Series
Бренд: Barrett Страницы: 65
Polsen XLR-USB-48 Manual preview
XLR-USB-48
Бренд: Polsen Страницы: 2
TRENDnet TPE-101I Quick Installation Manual preview
TPE-101I
Бренд: TRENDnet Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды