D9U003VA0-0101_04
41
12 Disposal
12.1 Environment Protection
The company LINET® is aware of the importance of environmental protection for future generations. Within this company the
environmental management system is applied in accordance with the internationally agreed standard ISO 14001. The compliance
with this standard is annually tested by the external audit executed by an authorised company. Based on the Directive No. 2002/96/
EC (Directive
WEEE
- Waste, Electric and Electronic Equipments) the company LINET, s. r. o. is registered in the List of Electric
and Electronic Equipment Producers (
Seznam výrobců elektrozařízení
) on the Ministry of the Environment of the Czech Republic
(Ministerstvo životního prostředí).
Materials used in this product are not environmentally hazardous. LINET® products meet valid requirements of national and Euro
-
pean legislation in the areas of
RoHS
and
REACH
, so they do not contain any prohibited substances in excess quantities.
None of the wooden parts is made of tropical wood (such as mahogany, rosewood, ebony, teak etc.) or made of timber from the
Amazon region or from similar rainforests. Product noise (sound pressure level) meets requirements of the regulations for the pro
-
tection of public health against undesirable effects of noise and vibration in protected interior spaces of buildings (according to stan
-
dard IEC 60601-2-52). Used packaging materials are in accordance with requirements of the Packaging Act (
Zákon o obalech
).
For disposal of packaging materials after installation of products contact your sales representative or manufacturer´s customer
service about the possibility of a free take-back of packaging through an authorized company (more details on
www.linet.cz
).
12.2 Disposal
The main objective of the obligations arising from the European Directive No. 2012/19/EU on Waste, Electric and Electronic Equip
-
ments (nationally regulated in Act No. 185/2001 Coll. as amended. On Waste and in Decree of the Ministry of the Environment No.
352/2005 Coll. as amended), is to increase the re-use, material recovery and recovery of electric and electronic equipment at the
required level, thereby avoiding the production of waste and thereby avoiding the possible harmful effects of hazardous substances
contained in electric and electronic equipment on human health and the environment. LINET® electric and electronic equipments
that have a built-in battery or accumulator are designed so that the used batteries or accumulators can be safely removed by LI
-
NET® qualified service technicians. There is an information about its type on the built-in battery or accumulator.
12.2.1 Within Europe
To dispose of the electric and electronic equipment:
►
The electric and electronic equipment must not be disposed of as household waste.
►
Dispose of this equipment at designated collection points or take-back points.
To dispose of the other equipment:
►
The equipment must not be disposed of as household waste.
►
Dispose of this equipment at designated collection points or take-back points.
LINET® participates in a collective system with take-back company REMA System (see
www.remasystem.cz/sberna-mista/
).
By bringing electric and electronic equipment to a take-back point, you participate in recycling and you save primary raw material
resources while protecting your environment from effects of unprofessional disposal.
12.2.2 Outside Europe
►
Dispose of the product or its components in accordance with local laws and regulations!
►
Hire an approved waste disposal company for disposal!
