D9U003VA0-0101_04
13
2.1 Before use
►
It is necessary to read the instructions for use before operating the mattress system.
► Follow the instructions carefully.
► Use the mattress system only as specified in the instructions for use.
► Only use mattress with original SCU. Using mattress with non-original SCU is not allowed.
► Never use safety straps designed for fixing the mattress to the bed for emergency evacuation of the patient.
► LINET® shall not assume any responsibility for any damage or injury resulting from incorrect use.
► Position the mains cable so that there are no loops or kinks in the cable; protect the cable from mechanical wear and tear.
Improper handling of mains cable can cause an electric shock hazard, other serious injuries or damage to the mattress
system.
► Position the mains cable so there is no risk of injuring the patient (e.g. choking hazard).
► Regular inspection of the mattress interior to be carried out on a regular basis.
► In case of any problem please contact manufacturer for help at installation, service or if an unexpected event occurs.
2.2 Installation
► Ensure that installation is performed in accordance with the instructions in the instructions for use.
► Ensure that maintenance is performed only by qualified personnel who have been trained by the manufacturer.
2.3 Usage
►
Ensure that the mattress system is only operated by suitably qualified personnel or after receiving instruction from them.
►
Only use the mattress system if it is in perfect working order.
►
Only use the system in clean environment.
►
Always hold SCU with scoop handle when moving.
►
Only use the mattress system with the correct mains supply (see Electromagnetic Compatibility).
►
Replace any damaged parts immediately with original spare parts only.
►
Do not exceed the maximum patient weight (see Mechanical Specifications).
►
Do not use the SCU in near flammable gases. This does not apply to oxygen cylinders.
►
Do not cover SCU while in use.
►
Do not place SCU near extreme heat sources such as radiators.
►
Never handle the mains plug with wet hands.
►
Disconnect the product from the mains only by pulling the mains plug. To pull the mains plug, always hold the actual plug, not
the cable.
►
Mattress and SCU must be checked at least once a day. Check that:
■
the mattress is inflated to the required pressure
■
the error code indicator is not illuminated
in case of error refer to the chapter System Faults
