manualshive.com logo in svg

Lincoln Electric Growth Series, Инструкция по сборке, Страница: 76 / 94

Поделиться
Скачать
Lincoln Electric Growth Series Скачать руководство пользователя страница 76

Torchmate 2x2 Growth Series

66

Step D2: Mount the AVHC lifter

Mount the Arc Voltage Height Control (AVHC) machine torch lifter station to the tool-mounting bracket (or 

directly to the tool mounting plate) on the Growth Series gantry using the included hardware.

How to install the 

lifter station

Qty

Part

Description

Part #

1

Motor Cables

Ethernet 

Crossover 

Cable

Laptop or PC, Accumove2, and wired 

CNC Cutting table

From Step D1

1

 

Height Control Lifter, ACCUMOVE

TMS-101-1100-02

4

Screw, SCS, 

5

⁄

16

”-18 X 1.0” lg, hex drive

TMS-410-0016-16

Required parts /  

components

•  The tool mounting plate is attached to the gantry, and in most cases it supports a tool 

mounting bracket. 

•  To mount the AVHC Z-axis lifter to the tool mounting bracket:

•  Insert the 4 screws through the back of the bracket and into the threaded holes in the 

back of the lifter station. 

•  There is adjustment available for the height in the lifter station slots. Mount the Z-axis 

lifter station as high above the cutting surface as possible.

•  To mount the AVHC Z-axis lifter to the tool mounting plate:

•  Remove the tool mounting plate from the gantry, by removing the four securing 

screws. Retain these screws.

•  Insert the 4 supplied screws  through the back of the bracket and into the threaded 

holes in the back of the lifter station. 

•  Re-mount the tool mounting plate (with the AVHC) to the gantry.

•  Insert the torch body into the mounting clamps and adjust the height of the torch body, and 

tighten the levers.

Содержание Growth Series































































































Отзывы:

Нет отзывов