Lincoln Electric Growth Series Скачать руководство пользователя страница 73

Страница: 73 / 94

Assembly Guide

What is the VFC?

Magnetic

beakaway

• The VFC box, placed close to the plasma power unit to minimize EMI interference,

measures the voltage the unit is producing to achieve it’s set amperage, The VFC

transforms the voltage to a signal that has greater noise-immunity and sends it to the

Accumove2. The Accumove2 then sends signals to the Z-axis motor to adjust the torch

height.

• Because of the industrial environment of the typical CNC plasma cutting table, electronic

noise, especially Electromagnetic Interference (EMI) can disrupt the operation of the

controllers and other electronics leading to problems in achieving optimal cut quality.

The VFC unit has been designed to reduce the effect of any EMI present in your shop

environment.

• For more information on what you can do to reduce EMI effects and ensure the highest cut

quality for your Growth Series with Accumove2 Technology CNC system, please find the file

EMI Reduction.pdf

on the

Torchmate / Lincoln Electric Cutting Systems USB Flash Drive

supplied with your system, or download it from this web location:

http://www.torchmatesupport.com/help/EMI Reduction.zip

• A magnetic breakaway is an available option for your AVHC torch holder. The torch is

held securely to the Z-axis carriage on the lifter station by magnetic force. If the torch

encounters an obstacle and collides with it, rather than breaking the torch body, the

collision overcomes the magnetic force and the torch body breaks away from its mounting.

This feature has saved countless torch replacements.

• In addition, a sensor switch in the magnetic breakaway signals the Accumove2 to stop all

table movements and turn off the plasma power unit’s current.

AVHC, VFC, and

cables

Содержание Growth Series































































































Результаты поиска

Содержание Growth Series

Отзывы:

Похожие инструкции для Growth Series

Бренды по названию

Популярные бренды

Lincoln Electric Growth Series, Инструкция по сборке

Результаты поиска

Содержание Growth Series

Отзывы:

Похожие инструкции для Growth Series

Бренды по названию

Популярные бренды