Lincoln Electric Growth Series Скачать руководство пользователя страница 31

Страница: 31 / 94

Assembly Guide

Illustrations

List parts and

components

• On previous pages you were provided a parts list, organized to help you receive parts. The

location, in terms of the numbered steps that follow, were also listed so you can quickly

locate the step that uses a particular part.

• Each of the assembly steps that follow provides its own list of parts or components,

including the quantity required for that step.

• Should you require additional quantities of any part, please contact Torchmate Technical

Support.
• Torchmate Technical support is available Monday through Friday from 6 AM to 4 PM

(06:00 to 16:00), Pacific Time Zone.

Written

instructions

• Detailed instructions are provided for each assembly step.
• If you ever find the instructions unclear, please contact Torchmate Technical Support and

let us know, so that we can not only give you immediate assistance, but so that we can also

make improvements to the instructions.

• For each step in the assembly, illustrations will guide you. For some illustrations, additional

close up views are provided.

• The assembly action is often illustrated with an exploded-diagram.

• For example, the following illustration shows two parts being assembled using screws

and nuts:

Toll Free: 1-866-571-1066

International: 775-673-2200

Fax: 775-673-2206

Email:

[email protected]

Содержание Growth Series































































































Результаты поиска

Содержание Growth Series

Отзывы:

Lincoln Electric Growth Series, Инструкция по сборке, Страница: 31 / 94

Результаты поиска

Содержание Growth Series

Отзывы: