Lincoln Electric Growth Series Скачать руководство пользователя страница 17

Страница: 17 / 94

Assembly Guide

8.4.4 Connect the work cable to the workpiece as close as possible to the area

being cut or gouged.

8.4.5 Do not work next to cutting power source.

AUTOMATIC OPERATION
9.1 Any CNC machine may begin to operate automatically without warning. Only

a trained individual familiar with the software, machine, and computer system

should operate this equipment.

9.2 Keep the immediate area around the CNC machine clear of materials that may

cause interference. Keep area clear of bystanders.

9.3 All untrained persons should not work on or near a CNC machine. Do not leave the

CNC machine unattended while power is on to any electronics.

10. NOISE

10.1 Noise can cause permanent hearing loss. CNC operation, plasma arc cutting, plate

marking, routing, and drilling can cause noise levels that exceed safe limits. You

must protect your ears from loud noise to prevent permanent loss of hearing.

10.1.1 To protect your hearing from loud noise, wear protective ear plugs and/or

ear muffs. Protect others in the workplace.

10.1.2 Noise levels should be measured to be sure the decibels (sound) do not

exceed safe levels.

10.2 For information on how to test for noise refer to the publications section of this

manual.

11. HEAVY PARTS

11.1 Parts of CNC machines are heavy. Also, material you are cutting may be heavy.

Use caution when lifting or moving them. To avoid injury, get someone to help

you, or use a mechanical lifter. When using a mechanical lifter, follow all the

manufacturer’s safety guidelines.

11.2 Review the Occupational Safety & Health Administration (OSHA) technical manual

Sect. 7, Ch 1.5. See the publications section that follows.

12. FLYING DEBRIS

12.1 Metal cutting and marking operations create waste that can fragment and fly.

Make sure you have proper eye protection and that everyone close to the CNC

operations has proper eye protection, too.

12.2 Review the ANSI Z87.1 requirements. See the publications section for additional

information.

Automatic

operation

Noise

Heavy parts

Flying debris

Содержание Growth Series































































































Результаты поиска

Содержание Growth Series

Отзывы:

Похожие инструкции для Growth Series

Бренды по названию

Популярные бренды

Lincoln Electric Growth Series, Инструкция по сборке

Результаты поиска

Содержание Growth Series

Отзывы:

Похожие инструкции для Growth Series

Бренды по названию

Популярные бренды