Lincoln Electric Growth Series, Инструкция по сборке

Страница: 40 / 94

Torchmate Growth Series
30
Step A5: Adjust the first cross-member
With the gantry positioned on your Torchmate 2x4 Growth Series CNC Cutting System table, you can now
begin to adjust the table’s squareness and begin to tighten the cross-members. Squaring is essential for
smooth and accurate gantry operation.
Qty Part Description Part #
1 Assembled cutting table From Step A4
Required parts /
components
Instructions
Illustration
• Move the gantry to one end of the table, until it reaches the stops.
• On each side rail, rotate the drive screw to move the aluminum brackets. Align the bracket
holes with the gantry holes.
• If there is a gap between the bracket and the gantry, slide the sides outward in the cross-
member channel until the gantry and bracket just touch with no pressure.
• If there is tightness between the bracket and the gantry, slide the sides inward in the
cross-member channel until the gantry and bracket just touch with no pressure.
• Tighten one of the T-bolts on each end of the adjusted cross-member.
With the gantry at its stop and the bracket holes aligned with
the gantry holes, check between the gantry and bracket for a
gap or for tightness. They should just touch on both sides, with
no pressure.
If tight,
slide inward
If a gap,
slide outward
When adjusted, tighten one T-bolt
at each end of the cross member