Liangzi Power UTV1000-3, Руководство по обслуживанию

Страница: 74 / 184

3.ENGINE
3- 46

Intermediate gear and breather gear (refer to DRIVE GEARS)

Timing chain guide and lower timing chain guide (see illustration above).
Carefully pull the timing chain sideward and down from the crankcase.
NOTE : Mark the operating direction of the timing chain before removal.
Timing chain inspection
Inspection is the same for both
timing chains.
NOTE : Check timing chain on
camshaft timing gear for excessive
radial play.
Check chain condition for wear and
teeth condition.
If chain is excessively worn or
damaged, replace it as a set (camshaft
timing gear and timing chain).
Timing chain installation
Installation is the same for both timing chains.
The installation is essential the reverse of the removal procedure, but pay attention to the following
details.
NOTE : Ensure to perform proper valve timing. Lock crankshaft (see CRANKSHAFT) and camshaft at
TDC ignition (refer to CYLINDER AND HEAD section).
Install timing chain with camshaft timing gear then, adjust chain tension (refer to CYLINDER AND
HEAD section).
CAUTION : Improper valve timing will damage engine components.