Liangzi Power UTV1000-3, Руководство по обслуживанию

Страница: 26 / 184

2.PERIODIC MAINTENANCE
2- 16
Check the level of cooling water in fluid
reservoir (auxiliary radiator) is between
upper and lower critical levels.
CAUTION
Coolant replacement
Park vehicle at flat ground and check horizontal line
of cooling liquid.
Remove coolant tank cap and the radiator cap.
Partially unscrew coolant drain plug
located below water pump housing.
When coolant is drained completely,
remove cooling drain plug completely
and install a new gasket ring.
Screw the coolant drain bolt and torque it to 10 N.m.
To avoid potential burns, do not remove the radiator cap or loosen the cooling drain plug if
the engine is hot. Never drain or refill cooling system when engine is hot.
Water pump
housing
Water pump
housing
Coolant
drain bolt
coolant tank
cap
radiator cap