LI-COR LI7200RS, Инструкция по эксплуатации

Страница: 97 / 226

B The
Time lag Optimization Settings...
, which activates when the
Automatic time lag
optimization
option is chosen as a
Time lag compensation
method, only gives the
Time
lag file available
option. If you want to use the automatic timelag optimization option in the
SmartFlux or SmartFlux 2 System, you will have to load a previously created timelag optim-
ization file at this time.
4
In
Advanced Settings > Spectral Corrections
both low frequency and high frequency cor-
rections are available.
However:
A In the
Correction for low-pass filtering effects
, the method by Fratini et al. (2012) is
deactivated, because this method requires an auxiliary file that is currently not available in
the SmartFlux or SmartFlux 2 System.
B
If an in situ method is selected (Horst 1997 or Ibrom et al., 2007), only the option
Spectral
assessment file available
is active, similar to the planar fit and timelag optimization
options discussed above. If you want to use one of these in-situ methods in the SmartFlux or
SmartFlux 2 System, you will have to load a previously created spectral assessment file at this
time.
Section 3. Operation
3-55 Advanced Processing