LI-COR LI7200RS, Инструкция по эксплуатации

Страница: 172 / 226

Section 7. Software Reference
Note: You can rescale both Y-axes of an active strip chart by right clicking on the
chart, holding, and dragging up or down. You can also open as many chart win-
dows as you want.
Configuration Files
The PC software uses a configuration file to store parameters of the instrument con-
figuration. These configuration files include information such as auxiliary input cal-
ibration coefficients, DAC output channels, instrument calibration coefficients and
zero and span values, and the source channels that you want to log. Unique con-
figuration files can be set up, saved, and then re-opened to easily change your setup
information.
When the software program is started for the first time, a default set of parameters
is loaded, which can be modified and saved as a new configuration file with a dif-
ferent name. The analyzer stores its configuration so that it will power on con-
figured just as it was when it was powered off.
To open an existing file, click on the
Config Files
but-
ton and select Open Configuration. Locate the file on
your computer, and click Open. The configuration file
parameters are automatically applied to the current
software session. You are prompted to send the con-
figuration to the instrument; changes are not imple-
mented in the instrument until the configuration file
is applied.
To save a configuration file, click on the Config Files
button and select
Save Configuration
. Select the items
in the Save Options dialog that you want to store in
the configuration file, and click
Continue
.
Choose the location to which you want to save the
file, enter a file name, and click Save. File names are
automatically appended with a .l7x file extension to denote an LI-7200/RS con-
figuration file.
7-34 LI-7200RS Enclosed CO₂/H₂O Analyzer