LI-COR LI7200RS, Инструкция по эксплуатации

Страница: 206 / 226

Appendix D. Configuration Grammar
Record Subcommands Remarks
(Data (CO2AW {float}) ) CO
2
Source The values included are set
by (Outputs(...)). How often
this is output is determined
by (Outputs (Freq...)).
(CO2AWO {float}) CO
2
Reference
(CO2Raw {float}) CO
2
absorptance
(CO2D {float}) CO
2
density (mmol m
-3
)
(CO2MF {float}) CO
2
mol fraction (µmol/mol)
(CO2MFd {float}) CO
2
mol fraction dry (µmol/mol)
(FlowPressure {float}) Flow module pressure, kPa (0-5
kPa)
(MeasFlowRate {float}) Measured flow module output,
SLPM
(VolFlowRate {float}) Measured volumetric flow module
output, LPM
(FlowPower {float}) Flow module voltage output (0-
14V)
(FlowDrive {float}) 0-100%
(H2OAW {float}) H
2
O Source
(H2OAWO {float}) H
2
O Reference
(H2ORaw {float}) H
2
O absorptance
(H2OD {float}) H
2
O density (mmol m
-3
)
(H2OMF {float}) H
2
O mol fraction (mmol/mol)
(Cooler {float}) Detector cooler (Volts)
(DiagVal {int}) Diagnostic value 0-8191255.
Boolean controlled output
(Data (DiagVal2 {int}) ) 31 bit diagnostic value The values included are set
by (Outputs(...)). How often
this is output is determined
by (Outputs (Freq...)).
(AvgSS
{float}) Average Signal Strength
(CO2SS
{float}) CO
2
Signal Strength
(H2OSS
{float}) H
2
O Signal Strength
(DeltaSS
{float}) CO
2
Signal Strength – H
2
O Signal
Strength
Table D-2 . Data and Diagnostic Records (...continued)
D-10 LI-7200RS Enclosed CO₂/H₂O Analyzer