LGL Electronics SPIN1, Инструкция по эксплуатации

Страница: 32 / 60

4.1 MENÙ SETUP
The SETUP menu sums up the settings of the accumulator’s main parameters.
− Ver. xx.xx = Software Release.
− AO = Advanced Options.
− YR = Yarn Rigidity.
− BR = Brake Rate.
− ID = SPIN identification address. It is used by the SPIN to establish a
serial communication with the external world. This address is generally
read by the SPIN through a special signal coming from the LGL box or
the flat cable clamp. If the SPIN does not find an acceptable address
value (1 to 254), it will set the default value ID = 0, will display the dedicated
icon and will inhibit the communication.
In this condition, a valid address must be manually set through the “Device
ID setting” menu (see chapter 4.2.12.1) to enable the communication.
Remember that, once the ID has been manually assigned, you need to
switch the device off and on again to validate the enabling of the serial
communication.
Inhibited Serial Icon:
4 - SETTING THE OPERATING PARAMETERS
Software
Release
TR Icon: Relaxation enabled
YR: YARN RIGIDITY
(see par. 4.2.9)
BR: BRAKE RATE
(see par. 4.2.10)
TE Icon: Tension Error enabled
T2 Icon: WorkTension2 enabled
ID:
Identification
AO: ADVANCED
OPTIONS
(see paragraph 4.2.8)
32