LGL Electronics SPIN1, Инструкция по эксплуатации

Страница: 16 / 60

16
2 - INSTALLATION
2. Connect the cable connector to clamp connector (
A
).
3. Place the clamp in the desired position; close the clamp grab screw until
the strip is punctured (
B
), taking care to have the connector profile match
that of the plate (
C
).
4. Connect the (A1N1SA792-0200) cable connector to the related
connector found on the accumulator and fasten it by tightening on the
accumulator the screw that is in the cable protection housing (
D
).
A
C
B
DEC
INC
D