LGL Electronics SPIN1, Инструкция по эксплуатации

Страница: 60 / 60

60
8 - SCRAPPING
8. SCRAPPING
If you decide to scrap the machine, you need to destroy/erase all machine
identification plates and related documents.
If disposal is assigned to an external party, always resort to organizations
duly authorized to recovery and/or disposal of the demolition materials.
If you perform the disposal on your own, you need to divide the material by
type and instruct authorized organizations to dispose of them according to
the various waste categories.
Separate metal parts, electric motor, rubber parts and parts from synthetic
material to provide for their re-use. However, the disposal shall be performed
in full compliance with the legal provisions in force at the time of disposal in
the country where the machine is located. Such provisions cannot be
predicted at the time when this booklet is being printed, but compliance with
them lies within the competence of the last owner of the machine or any of
his representatives.
L.G.L. Electronics will not be held responsible
for damages to property or
harm to people ensuing from the reuse of individual machine parts in
functions or arrangements other the original ones for which the machine was
designed.