25
206-4310
EZ-Manager Wizard (Cont.)
(Continued from previous page)
If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with
the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric
Configuration screen example on page
22).
When the Pro:Centric configuration is complete, an
EZ-Manager Configuration Complete screen (see example on page
10 seconds, the wizard exits, and the STB turns OFF.
Note:
With the EZ-Manager Configuration Complete screen on display, you can also manually
turn off or reboot the STB. If desired, select
TURN OFF
or
REBOOT
, respectively, and then press
OK
on the Installer Remote.
USB Configuration
STB Manager / USB download options
enable you to download configuration or software files
individually from a USB memory device to the STB. You can also use the Ez Download utility
available from the menu to select multiple types of files to be downloaded at one time using one
process.
Each of the USB download
functions requires that you have the appropriate file(s) loaded on a
USB memory device. If you wish to perform a software update or download background image
files, the software update/image file(s) must be stored in a folder named “LG_DTV” in the root
directory of the USB memory device. Clone/Configuration (.tlx) files should simply be stored in the
root directory of the USB device.
The procedure below assumes the desired file(s) is/are already loaded onto the USB device. For
further information on the STB Manager / USB download options and file requirements, and/or for
information on creating Clone/Configuration (.tlx) files, refer to the appropriate section(s) in this
document.
Before You Begin
• If you intend to use the Zoning feature(s) on this STB, make sure to assign the appropriate STB
Zone # and/or Wi-Fi Zone # in the EZ-Manager’s Zones, Label, and Room Number screen
BEFORE continuing with USB Configuration. See “STB Configuration Options” on page 18 for
further information.
• Ensure the USB device to be used has been formatted with FAT format.
•
When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.
• Refer to “Ez Download Utility” on pages 27 to 30 for further information on the Ez Download utility.
• Refer to “Custom Master STB Setup” on pages 42 to 44 for information on creating a Clone (.tlx)
file, and/or
refer to “Creating an FTG Configuration File” on pages
creating a FTG Configuration (.tlx) file for FTG Mode configuration.
• See Reference section, “Downloading Background Images using a USB Memory Device,”
for background image guidelines.
• See Reference section, “Updating STB Software using a USB Memory Device,” for further
information on software updates.
USB Configuration via EZ-Manager Wizard
With either the STB Configuration Options or the Zones, Label, and Room Number screen on
display, proceed as follows to configure the STB/display using the USB memory device.
