LG STB-5500 страница 37 Скачать руководство пользователя

Страница: 37 / 97

206-4310

Installer Menu (Cont.)

021 - V-CHIP (Parental Control)

Set to 1 to activate V-Chip (Parental Control) and have it available

to the end user to filter and control or otherwise restrict program

ming content that can appear. Set to 0 to turn the V-Chip feature

Off (not available to user); no programming restrictions can be set.

022 - MAX BLK HRS (Maximum Block Hours)

Sets hours from 0 to 99 for the maximum V-Chip (Parental Control)

block hours. Default setting is for 12 blocking hours.

Note:

This item is not available in the Installer Menu when item

021 V-CHIP is set to 0 or when item 084 PERMANENT BLK is set

to 1.

023 - CAPTION LOCK

If set to 0, captions are OFF when the STB/display panel is turned

ON. Set to 1 to use the caption setting configured before the STB/

display was turned OFF when the STB/display is turned ON.

028 - CH. OVERIDE (Channel Override)

This item either allows or restricts tuning of channels that are NOT

in the PTC Channel Map.

If set to 1, end users can tune channels

that are not in the PTC Channel Map by direct keypad entry. If

set to 0, users are restricted to only the channels that are in the

PTC Channel Map. In the case of CPU-CTV Mode, there are no

channels in the PTC Channel Map; therefore, direct keypad entry

is not available. Also, when this item is set to 0, the PTC Channel

Map (PTC-CTV Mode)/CPU channel lineup (CPU-CTV Mode)

is locked, and user access to channel settings in the STB setup

menus is restricted.

Note:

This item is not applicable when the STB is in FTG Mode.

029 - OLD OCV (On Command Video™)

Set to 1 to remap the PTC’s direct tune channels for Aux inputs

from 13x to 9x. This allows 2-digit only tuning systems (i.e., legacy

OCV) to direct tune Aux inputs. See also Reference section, “STB

Aux Input Configuration.”

030 - ACK MASK

MPI Communication Parameter. When set to 1, enables ACK

feature of MPI.

031 - POLL RATE

MPI Communication Parameter. Selects poll rate for MPI. Step size

of 16 ms. Changing from default may affect communication via MPI.

032 - TIMING PULSE

MPI Communication Parameter. Sets baud rate for MPI. Step

size of 4.3 uS. Changing from default may affect communication

via MPI.

035 - HDMI1 ENABLE

Set to 1 to enable HDMI 1 input in DTV Mode. Set to 2 to enable

HDMI 1 input in PC Mode. Set to 0 to disable display panel HDMI

1 input.

039 - REAR AUX EN. (Rear Aux Enable)

Set to 1 to enable display panel rear Aux (AV) input. Set to 0 to

disable display panel rear Aux (AV) input.

041 - SIMPLINK EN

Set to 0 to disable the SIMPLINK feature. Set to 1 to enable

SIMPLINK functionality (does not enable remote control access to

the SIMPLINK Menu).

Note:

When both this item

and

item 042 AUTO INPUTS are

enabled in the Installer Menu, HDMI inputs will be detected by

SIMPLINK, but the Auto Input(s) Sensing Feature will not function.

042 - AUTO INPUTS

Determines the Aux inputs for which auto-sensing is enabled. Set

to 0 to disable auto-sensing for all available inputs. Set to 255 to

enable auto-sensing for all available inputs. For information on

options for individual input settings, see Reference section, “Auto

Input(s) Sensing Feature.”

Note:

In order for auto-sensing to be enabled for an input, that

input must also be enabled in the Installer Menu. For example, to

enable auto-sensing for HDMI 1, item 035 HDMI1 ENABLE must

also be set to 1 or 2. Also, see note above regarding STB operation

when both this item and item 041 SIMPLINK EN are enabled.

046 - STRT AUX SRCE (Start Aux Source)

Sets the starting Aux source. When turned ON, the STB/display

panel will tune to starting Aux source if item 004 STRT CHANNEL

is set to 0.
1 = AV

3 = HDMI 1

5 = HDMI 2

7 = HDMI 3

255 = Last Aux

Note:

Above is applicable only if all Aux sources are enabled.

Note:

This item is not available in the Installer Menu unless item

004 STRT CHANNEL is set to 0.

047 - AUX STATUS

Set to 1 for MPI Aux source to be reported as a channel number

instead of channel 0. Set to 0 to disable Aux identification change.

Controls MPI status channel response for Aux inputs.

049 - DIS. AUDIO M. (Disable Audio Menu)

Determines the availability of the Sound Out (Audio) Menu in the

STB menus. Also determines the default Audio Mode when STB

is turned ON. See the table below and set as required.

Note:

If a SIMPLINK-enabled device is connected to the STB

and item 041 SIMPLINK EN is set to 1 (enabled), the SIMPLINK

device Audio Mode will have priority over the setting of this item

when the STB/display is turned ON.

Note:

When this item is set to 6 or 7, the Bluetooth Sound Sync

Media Share feature is not available. If Bluetooth Sound Sync is

currently enabled in the IP Environment / Media Share Menu, it

will be disabled.

Содержание STB-5500


































































































Результаты поиска

Содержание STB-5500

Отзывы:

Похожие инструкции для STB-5500

Бренды по названию

Популярные бренды

LG STB-5500, Руководство по настройке коммерческого режима

Результаты поиска

Содержание STB-5500

Отзывы:

Похожие инструкции для STB-5500

Бренды по названию

Популярные бренды