75
206-4310
Reference: Enabling or Disabling the MTI Protocol on the STB
This section describes how to enable or disable the MTI protocol (MPI/MTI TELEVISION CONTROL) on
the STB. Refer to the appropriate procedure below depending on whether you would like to complete the
steps via the Installer Menu or using the FTG File Manager. By default, the MTI protocol is disabled.
Note:
If you do not see the STB’s video output on the display, use the display panel’s IR remote to
manually switch the display panel to the appropriate HDMI input so that you can complete the required
procedure.
Enable/Disable the MTI Protocol via the Installer Menu
1. Use the Installer Remote to access the STB’s Installer Menu, and navigate to Installer Menu item 113
PANEL TYPE.
PTC INSTALLER MENU
STB_5500
CPU
-
CTV
113 PANEL TYPE 004 MTI EN
UPN 000-000-000-000 SW 5331 7F60
PTC V#.##.###
CPU V#.##.##.##
2. Either:
• Press
719
+
OK
on the Installer Remote to enable the MTI protocol.
• Press
719
+
EXIT
on the Installer Remote to disable the MTI protocol.
Enable/Disable the MTI Protocol using the FTG File Manager
This procedure describes how to modify the MTI protocol setting using the File Manager. Once you save
the new .tlx file, you can
transfer (import) it to a Target STB using a USB memory device.
Note:
If the EZ-Manager Wizard appears on the screen when you turn ON the Target STB/display panel,
you can use the wizard’s “USB Configuration” option to access the STB Manager and complete the
import
procedure (see “STB Configuration Options” and/or “USB Configuration” on pages
as necessary). See also “Importing a Clone File” on pages 47 to 51 for further information.
1. Launch the FTG File Manager and open an existing file or create a new file (i.e., load FTG Installer
Menu settings for the STB-5500), as necessary.
2. In the FTG Installer Menu Configuration Utility, click on Installer Menu item #113 Panel Type in the
Index tab, or click on the STB I/O tab.
3. Type
MTI
in the text field at the bottom of the #113 Panel Type options. An “MTI Disable” checkbox will
be displayed (with a checkmark if the MTI protocol is currently disabled or without a checkmark if the
MTI protocol is currently enabled). See example below.
MTI Code
This example indicates that the MTI
protocol is enabled. If the MTI protocol
is disabled, no text will appear.
(Continued on next page)
