51
206-4310
(Continued from previous page)
Note:
If the Target STB was previously in Pass-through Mode, and the
Clone/Configuration (.tlx)
file that was imported contained an FTG Channel Map, the Target STB CPU is now in FTG Mode
.
Upon restart
(and, if applicable, confirmation of new
video output resolution—see note below),
the STB tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is
specified, the
STB
will tune to that channel, though, in the case of FTG Mode configuration, a
channel banner will only be displayed if the Start Channel is included in the FTG Channel Map
(depending on your selection in step 11, the channel banner will display either the Start Channel’s
logical channel number or physical RF channel number). Otherwise, the STB will either return to
the last channel tuned (STB
in Pass-through Mode) or tune to the first channel in the FTG Channel
Map (STB in FTG Mode). If the latter, remember that the channels in the FTG Channel Map are
always arranged in logical order, regardless of your selection in step 11.
Note:
If you updated the STB configuration with a Clone/Configuration (.tlx) file that included a
change to Installer Menu item 105 VID OUT FORMAT, when the reboot is complete, you will be
prompted to confirm the new video output resolution
. See item 105 description on page 39 for
further information.
Cloning Procedures (Cont.)
