20
206-4310
EZ-Manager Wizard (Cont.)
EZ-Manager Wizard (Cont.)
Note:
Zoning features are only applicable for STBs that will be configured
using a “.tlx”
file
(local or
remote configuration).
ZONES, LABEL, AND ROOM NUMBER
SAVE
.
If creating Wi-Fi Zones for AP settings, select the appropriate Wi-Fi
Zone # (1-99) based on the Wi-Fi Zone in which this STB is installed.
.
If creating Zones for Installer Menu settings and/or Channel Mapping,
select the appropriate STB Zone # (0-8) based on the Zone in which
this STB is installed. (See Commercial Mode Setup Guide for more
information.)
.
Select a Label and/or input the Room Number, as required.
.
When done, select SAVE to continue.
BACK
Wi-Fi Zone
<
0
>
STB Zone
<
0
>
Label
<
-----
>
Room Number
Room Number
SAVE
BACK
02
1. Complete the appropriate field(s) as described below.
Use the Left/Right arrow keys on the
Installer Remote to navigate between each of the fields.
• Wi-Fi Zone:
Enables you to set a Wi-Fi Zone # so that the STB can be configured with a
particular access point’s login data for wireless networking. Login data (i.e., SSID, security type,
and security key) may be provided in a
Clone/Configuration (.tlx) file.
To assign a Wi-Fi Zone, navigate to the Wi-Fi Zone field at the top left of the screen, and use
the Left/Right arrow keys to specify the desired Wi-Fi Zone # (1–99).
•
STB Zone: Enables you to set an STB Zone # so that the STB can be configured with
Installer Menu and/or Setup Menu settings intended only for the assigned Zone. The Installer
Menu and/or Setup Menu settings may be provided in a
Clone/Configuration (.tlx) file. If
the
STB is being configured for FTG Mode, the
STB Zone # setting also allows the STB to omit
channels that have been restricted in the FTG Channel Map.
To change the STB Zone from its default value (0), navigate to the STB
Zone field, and use
the Left/Right arrow keys to specify the desired STB Zone # (1–8).
• Label: Allows you to select a North, South, East, or West text label for this STB. In the Label
field, use the Left/Right arrow keys to select the applicable label.
• Room Number: Allows you to specify the number of the room—up to 16 characters—in which
the STB is located. To enter a room number, navigate to the Room Number field and press
OK
. You can then use the number keys on the Installer Remote to direct enter a room number,
or you can use the arrow keys to select the appropriate alphanumeric character(s) from the
pop-up virtual keyboard at the bottom of the screen. When you are done, select
Enter
from the
virtual keyboard, and then press
OK
on the Installer Remote.
Note:
The STB name (default: STB’s serial number) will be changed to the room number
specified
here. See “Media Share Setup” on pages 64 to 65 for further information on the
STB name.
2. When you are ready to continue, use the arrow keys to select
SAVE
, and then press
OK
on the
Installer Remote to return to the STB Configuration Options screen. Then, proceed as required;
i.e., select
NEXT
to configure Pro:Centric settings or select
USB CONFIGURATION
to use a
USB memory device to complete the configuration.
