LG STB-5500 страница 15 Скачать руководство пользователя

Страница: 15 / 97

206-4310

Pro:Centric Setup

Administration and management options for the Pro:Centric server are described in detail in the

Pro:Centric Server Admin Client User Guide

. This document describes only those settings that must

be specified on the STB to enable Pro:Centric remote management and/or the Pro:Centric application.

• Remote management (E-Z Installation): The Pro:Centric server Admin Client provides remote

management facilities for downloading software/firmware updates as well as facilities for downloading

a Clone/Configuration (.tlx) file for FTG Mode configuration.

• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,

comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric

application settings are managed via the Pro:Centric server Admin Client.

The Pro:Centric server settings can be configured

using one of the methods described below.

STB in Factory Default State

When the STB is in a factory default state, the EZ-Manager Wizard provides automated or manual

options for configuring the Pro:Centric server settings.
The EZ-Manager Wizard also provides a USB Configuration option that enables you to configure an STB for

FTG Mode using a Clone/Configuration (.tlx)

file stored on a USB memory device. The “.tlx” file incorporates

FTG Installer Menu settings, including Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL,

which are used to set up the STB’s Pro:Centric feature.
Refer to “EZ-Manager Wizard” on pages 17 to 26 for further information on the EZ-Manager Wizard options.

Note:

If Pro:Centric data delivery will be over IP and there is a Domain Name System (DNS) server at the

site, you can create a “procentric.local” DNS entry for the Pro:Centric server that will enable automated

Pro:Centric IP configuration via the EZ-Manager. If there is no DNS entry for procentric.local, you will need

to manually enter the Pro:Centric server IP address and port number during configuration.

STB in Pass-through Mode

If the STB is in Pass-through Mode, either:
• Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.

See Installer Menu information on pages 31 to 41 for further details. Also, as necessary, refer to “Custom

Master STB Setup” on pages 42 to 44 and/or cloning information on pages 45 to 51.

•

Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You

must use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See

“Accessing the IP Environment Menu” on page 58 and “Pro:Centric Setup” on pages 62 to 64 for further

information.

Note:

When the STB is in either Pass-through Mode or FTG Mode, you can also leave Installer Menu item

119 DATA CHANNEL set to its default value (255) to enable the STB’s Data Channel Auto Search feature

to set the DATA CHANNEL value. See item 119 description on page 40 for additional information.

STB in FTG Mode

If the STB is in FTG Mode, use the FTG File Manager software to update Installer Menu items #98

Pro:Centric and #119

Data Channel (along with their affiliated fields). Then, transfer the FTG Installer Menu

settings to the STB. Refer to the FTG Mode overview on pages 12 to 13 for further information on FTG

Mode operation and configuration

. Also, see note above regarding the option to use the STB’s Data Channel

Auto Search feature to set the DATA CHANNEL value.

Pro:Centric Operation (Cont.)

Содержание STB-5500


































































































Результаты поиска

Содержание STB-5500

Отзывы:

Похожие инструкции для STB-5500

Бренды по названию

Популярные бренды

LG STB-5500, Руководство по настройке коммерческого режима

Результаты поиска

Содержание STB-5500

Отзывы:

Похожие инструкции для STB-5500

Бренды по названию

Популярные бренды