44
206-4310
Custom Master STB Setup (Cont.)
(Continued from previous page)
4. Set up STB/display panel features.
On-screen setup menus control the features of the STB/display.
Press
MENU
on the Installer Remote, and select the
All Settings
menu icon from the Quick Settings Menu to access the advanced
STB setup menus. Then, set Picture, Sound, Channels, etc. options
to the desired configurations. See “Clonable STB Setup Menu
Features” list on page 42 and also notes below.
Note:
If you intend to use the Zoning feature(s) on this STB, make
sure to assign the appropriate STB Zone # and/or Wi-Fi Zone # at
this time as described in Reference section, “Using the STB’s Zoning
Features.”
Note:
If desired and if appropriate, you can run Auto Tuning (see
step 5) prior to completing this step.
5. (Optional) Run Auto Tuning.
If you are creating a Master STB Setup for cloning purposes and
you want the Target STB(s) to remain in Pass-through Mode, do
NOT run Auto Tuning. If you export a Master STB Setup that
includes an auto-tuned/edited channel lineup, thereby creating a
Clone (.tlx) file with an FTG Channel Map, and then import the
Clone file to a Target STB, this will put the Target STB in FTG
Mode.
Note:
When you import a Clone/Configuration (.tlx) file that contains
an FTG Channel Map on a Target STB (for FTG Mode configuration),
depending on the types of channels included in the Channel Map,
you may have the option to select either logical or physical channel
tuning. For either selection, the channel sequence will be based on
the order in which the channels appear in the FTG Channel Map.
You can view and/or edit the channel sequence in the FTG File
Manager, as required.
a) Use the Installer Remote to access the Channels Menu. Then,
select
Channel Tuning
and follow the on-screen instructions to
search for all available analog and digital channels.
b) Use the
Channel Manager
option in the Channels Menu to edit
the channel lineup, as necessary. Add/delete channels per your
system requirements.
6. Verify the STB/display panel setup.
Make sure the STB/display features are set per your requirements.
Also, if applicable, verify that the channel lineup is correct.
The Master STB Setup is now ready to be saved (exported) to a USB
memory device. See “Cloning Procedures” on pages 45 to 51.
Use the STB setup menus to set
the display features to the desired
configuration for the end user.
This example illustrates the
advanced STB setup menus.
(Optional) Use Channels Menu
options to run Auto Tuning and
edit the channel lineup.
Picture
Sound
Channels
General
Safety
Accessibility
PICTURE
Aspect Ratio
16:9
PICTURE
CHANNELS
Channel Tuning
Channel Manager
Channel Label
Multi Audio
Picture
Sound
Channels
General
Safety
Accessibility
