LG niagara4 MultiSITE Edge 10 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 73

LG niagara4 MultiSITE Edge 10 Скачать руководство пользователя страница 6

MS- E10 User Guide

Due to our policy of continuous product innovation, some specifications may change without notification.

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp. 6

ABOUT THIS GUIDE

This topic contains important information about the purpose, content, context, and intended audience for this document.

Product Documentation

This document is part of the Niagara technical documentation library. Released versions of Niagara software include a complete

collection of technical information that is provided in both online help and PDF format. The information in this document is written

primarily for Systems Integrators. In order to make the most of the information in this book, readers should have some training or

previous experience with Niagara 4 software, as well as experience working with JACE network controllers.

Document Content

This document describes the initial Niagara 4 software installation and configuration for a QNX-based controller, using

Workbench (versions Niagara 4.7 and later).
For physical mounting and wiring details for the device, refer to its specific hardware installation document.
This document does not cover station configuration or Niagara 4 components. For more information on these topics, please refer

to online help and various other Niagara 4 software documents.

Related documentation

Additional information on Niagara system, devices and protocols is available in the following documents.

•

MS-E10 Mounting and Wiring Guide

•

JACE-8000 Install and Startup Guide

•

Niagara Provisioning Guide

•

Niagara Platform Guide

«
...
4
5
6
7
8
...
»

Содержание niagara4 MultiSITE Edge 10










































































Отзывы:

Нет отзывов