LG LRE3061BD страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 80

background image

-2-

This LG Service Manual, “30” Freestanding Self-Cleaning Electric Range,” provides the technician with information on the operation

and service of the Freestanding Self-Cleaning Electric Range. It is to be used as a training Service Manual. For specific information

on the model being serviced, refer to the “Owner’s Manual” or “Tech Sheet” provided with the electric range.

SAFETY PRECAUTIONS

• Repairs of the appliance should be carried out by a licensed technician only. Incorrect repairs may result in dangerous situations. If

you need repairs, contact an LG Service Center or your dealer.

• If the power cord is defective, it must be replaced by a qualified service agent with a UL listed range cord.
• Electrical leads and cables should not be allowed to touch the oven.
• Rating plate is located on the left side of warming drawer.
• The power supply of the appliance should be turned off when it is being repaired.

LG Electronics assumes no responsibility for any repairs made on our products by anyone other than Authorized Service Technicians.

FORWARD

• DISCONNECT power supply cord from the outlet before servicing.

• Replace all panels and parts before operating.

• RECONNECT all grounding devices.

- Failure to do so can result in severe personal injury, death or electrical shock.

• DO NOT Touch when the oven operates.

- The interior parts will be very hot.

WARNING

«
1
2
3
4
...
»

Содержание LRE3061BD

















































































Отзывы:

Нет отзывов

Похожие инструкции для LRE3061BD

Advantium ZSA1201

Бренд: GE Страницы: 48

Бренд: U.S. Range Страницы: 2

Profile Advantium PSA2200R

Бренд: GE Страницы: 80

Profile Advantium PSB9240DFBB

Бренд: GE Страницы: 3

Бренд: GE Страницы: 40

Бренд: Teka Страницы: 14

Бренд: Oster Страницы: 36

Бренд: Daewoo Страницы: 19

Бренд: Scarlett Страницы: 12

Бренд: Calex Страницы: 22

Бренд: Master Chef Страницы: 32

Бренд: Magio Страницы: 24

Бренд: Daewoo Страницы: 10

Бренд: NEFF Страницы: 56

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 48

Бренд: Panasonic Страницы: 68

Бренд: Electrolux Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды