LG LDK24 ADSL Router Скачать руководство пользователя страница 97

Страница: 97 / 100

Programming Manual for Digital Key Telephone System

LDK-

300 & LDK-100

DVM Features

6-2

Condition

1. The message will be undated only after user

2. To leave an Urgent message, change the

setting of message send option in COS (in PC
Program ‘ADMIN’ or online admin)

ONE TOUCH RECORD

Description

This feature allows the station user while on an
internal/external call, to press a button and have

the system record the conversation in the station

users mailbox. This is done by creating
conference among the parties in conversation

and the DVM port. A pause/resume function is

available while in the recording mode.

Operation

1. DKTU station user presses the button assigned

for DVM One-touch Record Feature whilst in

conversation with an internal/external party.

2. While the conversation is being recorded, the

[DVM One-touch Record]

button will flash at 240

IPM. And after it is finished, the

[DVM One-touch

Record]

button will be extinguished.

3. If the user pauses the recording during

conversation, the

[DVM One-touch Record]

button will flash at 30 IPM, and

[DVM

Pause/Resume]

button will be turned on. When

the conversation is resumed by pressing

[DVM

Pause/Resume]

button, the

[DVM One-touch

Record]

button will flash at 240 IPM, and

[DVM

Pause/Resume]

button will be extinguished.

Deactivation of VM Record

1. Recording operation is finished automatically

when station goes on-hook, or

[DVM One-touch

Record]

button is pressed again.

2. And if

[FLASH], [TRANS], [HOLD]

, or

[CONF]

button is pressed, or if CO party hangs up during
the recording, recording procedure is also

finished. This applies to the cases in which user

presses some flexible buttons programmed as
DSS, Group, CO or LOOP.

Condition

1. If no VM port is available when the station user

wants to record, the flexible button will not be

fluttered as indicating that the recording is

unavailable and it gives single error tone.

2. If the user hangs up without terminating the

record function, the system will perform the hang-

up procedure.

3. Digital telephones are allowed this capability.

4. If a recording is done to another internal station,

the station being recorded cannot invoke the

record feature.

5. Only one active recording per station is allowed.

6. Conference call users are not able to use this

feature.

7. A pause/resume function is available while in

the recording mode. This function allows the user

to suspend/start the recording during the record

mode.

ANSWERING MACHINE EMULATION

Description

This feature allows a station to monitor calls sent

to their mailbox. During monitoring, the station can

answer the call or let the caller continue to record
a message in the mailbox.

Operation

1. An incoming call rings a station and then

forwards to the voice mail (unconditional, no-

answer).

2. When answering machine emulation is enabled

as speaker mode by pressing the pre-

programmed

[Answer Machine - Speaker]

key,

the corresponding key will flash in case of an

incoming ring and the conversation between the

caller and DVM will be heard over the speaker.

3. When answering machine emulation is enabled

as ring mode by pressing the pre-programmed

[Answer Machine - Ring]

key, the corresponding

key will flash in case of an incoming ring and

audible ring will be heard over the speaker.

4. To answer the call and cancel the message the

user presses the ON/OFF button or lifts the

Содержание LDK24 ADSL Router





































































































Результаты поиска

Содержание LDK24 ADSL Router

Отзывы:

LG LDK24 ADSL Router, Руководство по программированию, Страница: 97 / 100

Результаты поиска

Содержание LDK24 ADSL Router

Отзывы: