LG LDK24 ADSL Router Скачать руководство пользователя страница 19

Страница: 19 / 100

Programming Manual for Digital Key Telephone System

LDK-

300 & LDK-100

CO Line Features

1-13

3. ISDN Call Hold feature is available during

conversation.

4. The line, which is associated with this

ISDN supplementary service, can not be

transferred to other stations or can not be

retrieved from other stations. And the held

channel can be retrieved only by the

station which held the channel before.

5. When a call is on hold, the associated LED

for the line will flash at 480 IPM in the

station that uses the line. And all the

LED’s will be ON (busy) in the other

stations.

6. When a call is on hold and the user make

a new call, the associated LED for the line

at the station will be ON.

ISDN – BROKER CALL

Description

This feature allows a station user engaged in
one ISDN CO line to hold that call and can

originate another call by using the same

channel. Once the second call is established,
the originating station may alternate between

calls carrying on a private conversation with

either party.

Operation

To hold the current call

;

(1) Press the

[FLASH]

key during

conversation.

(2) Press the

[HOLD]

key. Or

(1) Press programmed

{

SUPP HOLD}

button.

2. To make a new call by using the same

channel

(1) Press the

[FLASH]

key.

(2) Press the

{

CO}

key. Or

(1) Dial CO Access

Code 9

3. To retrieve the held call during

conversation;

(1) Press the

[HOLD]

key. Then

current call goes on hold and the held

call is retrieved.

Admin Programming

ISDN Attribute(PGM200)

Condition

Both keypad protocol and functional

protocol are implemented.

[FLASH]

and

[HOLD]

keys or pre-

programmed

{

SUPP HOLD}

are needed

for this feature.

{

SUPP HOLD}

key can

be made by

Code [TRANS/PGM] *75#

3. ISDN Call Hold feature is available during

conversation.

4. ISDN-Broker Call is available during

conversation.

5. The ISDN CO line, which is associated

with this ISDN-Broker call, can not be

transferred to the other station. And the

held channel can be retrieved only by the

station which held the channel.

6. ISDN-Broker Call is associated with ISDN-

3 Party Conference and Call Waiting

ISDN – 3 PARTY CONFERENCE

Description

This feature allows the user to make 3 party

conversation with one ISDN CO channel.

Operation

1. To make a 3 party conversation;

Press

[FLASH]

[CONF]

{

SUPP

CONF}

when a call is in Supplementary

Hold and a call in conversation.

2. To hold a party during 3 party

conversation

Press

[FLASH]

[HOLD]

{

SUPP

HOLD}

during 3 party conversation.

Содержание LDK24 ADSL Router





































































































Результаты поиска

Содержание LDK24 ADSL Router

Отзывы:

LG LDK24 ADSL Router, Руководство по программированию, Страница: 19 / 100

Результаты поиска

Содержание LDK24 ADSL Router

Отзывы: