LG LDK24 ADSL Router Скачать руководство пользователя страница 51

Страница: 51 / 100

Programming Manual for Digital Key Telephone System

LDK-

300 & LDK-100

System Features

3-6

announcement or inter-digit time (5sec) after

the announcement.

8. If the caller does not dial any digit within inter-

digit time (5sec) after VMIB announcement,
the call will be routed to the ring assigned
stations or disconnected after error tone.

9. Incoming CCR call will be served or

disconnected after programmed VMIB
announcement according to CCR program.

10. To use CCR feature for DID, VMIB should be

assigned for Flexible DID Destination (PGM
231).

11. If a user presses # button while CCR is

operated, the first system greeting will be
heard again. Press button to listen to the

previous system greeting

12. An incoming call with CCR may be

programmed to be dropped after VMIB

announcement if

“#” is inserted after

programmed VMIB announcement according
to CCR programming.

13. If a call is routed by ‘system speed dial’ in

CCR, or Flexible DID table, the call will be
charged to the programmed station (same as

Incoming CO Off-net Call Forward).

14. System speed bin cannot be assigned in the

same bin number in the Flexible DID Table as

mixed entry for each day and night destination.

CHANGE KEYSET RING CADENCE

Description

The keyset ring cadence for intercom or CO line
ring may be reversed.

Admin Programming

Single Ring for CO line Call (PGM 161-BTN

Condition

mode,

SLT = ICM - 1sec ON, 4sec OFF
CO - 0.4 ON, 0.2 OFF, 0.4 ON, 4 OFF
Keyset = ICM - 0.8 ON, 2.4 OFF
CO - 0.4 ON, 0.4 OFF, 0.4 ON, 2 OFF

In

YES

mode,

SLT = ICM -0.4 ON, 0.2 OFF, 0.4 ON, 4 OFF
CO - 1sec ON, 4sec OFF
Keyset = ICM - 0.4 ON, 0.4 OFF, 0.4 ON, 2 OFF
CO - 0.8 ON, 2.4 OFF

CLI MESSAGE WAITING

Description

The caller's number is displayed on the LCD of

the called party if 1) a DISA/DID call through ISDN

DID line is received or 2) in case of analogue CO
line, the line is in talk state or 3) a call of analogue

CO is not answered. If the caller hangs up the call

before answered by the called party or attendant,
the CLI (Calling Line Identification) will be left into

the original called party.

Operation

When a CO line ring is received at ISDN CO line,
1. The phone number is displayed on the LCD

of ringing station.

2. If it is not answered, the CLI is displayed on

the LCD.

MSG:

CLI(3)

To retrieve the message,

1. Press the

[CALLBK]

button to confirm the

message.

2. Then the message (CLI number, date/time,

calling count from the same CLI) will be

shown on the LCD.

To delete the current message,

1. Press the

[CONF]

button.

2. Then the current CLI message is deleted and

the next CLI message is displayed.

To delete all CLI messages in a station,

1. Press the

[CALLBK]

button.

2. Press the

[DND/FOR]

button.

3. Press the

[HOLD/SAVE]

button.

To make a callback,

1. Press the

[HOLD/SAVE]

button.

2. An available CO line in the first accessible CO

group is seized and the number is dialed.

Содержание LDK24 ADSL Router





































































































Результаты поиска

Содержание LDK24 ADSL Router

Отзывы:

LG LDK24 ADSL Router, Руководство по программированию, Страница: 51 / 100

Результаты поиска

Содержание LDK24 ADSL Router

Отзывы: