LG LDK24 ADSL Router Скачать руководство пользователя страница 66

Страница: 66 / 100

Programming Manual for Digital Key Telephone System

LDK-

300 & LDK-100

System Features

3-21

.‘SLT DTMF RLS TMR’ should be adjusted to

reasonable value in order to print all digits that

SLT dialed.

SMDR – Call Cost Display

Description

With the PRU or PRCPTU installed on LCOB4

or LCOB2, the system can be programmed to

display an estimated cost for outside calls on a
fixed charge per call metering pulse, as

assigned in the system. The cost is shown in the

LCD instead of the call timer and is updated
based on receipt of each call metering pulse.

Admin Programming

Metering Type (PGM 142-BTN 3)

SMDR Cost per Unit Pulse (PGM 177-BTN

10)

SMDR Fraction (PGM 177-BTN 11)

Condition

The call cost is displayed based on “Call

Metering Pulse”.

When a call is in hold, the holding time is

included in the call cost display.

If the cost per call metering pulse is set to
0.00, the display for outgoing calls will show

the call duration.

SMDR – Lost Call Printing

Description

Lost call means that the caller gives up and
terminates the call before the call is answered.

The format of the individual call record is

illustrated below, and the contents are focused on
each case about the types of lost call.

NO STA CO TIME START DIALED

----- ---- --- ------ ----------------- -----------------------

0001 EXT 001 00:00:10 24/05/99 11:55 R RING 00:05

Normal incoming call is received at an assigned stations of CO

031 during 5 sec.

0002 101 003

00:

01:20 25/05/99 16:23 R RNG 00:09

DID call is disconnected during it is being forwarded to ATD

STA 101, because the dialed station does not exist.

0003 100 001 00:00:20 25/05/99 18:11 R100 RING 00:04

DID call is received at STA 100 during 4sec and disconnected.

0004 102 002 00:01:20 26/05/99 18:37 R103 RING 00:04

DID call is received at STA 102 via unconditional call forward

to STA 103 during 4 sec and disconnected.

0005 621 008 00:00:20 26/05/99 13:02 G620 RING 00:06

DID call is received at Ring Group 621 during 6sec and

disconnected.

0006 100 001 00:00:04 06/05/99 16:04 H100 RING 00:02

DID call is disconnected while STA 100 is being held it.

0007 102 001 00:00:07 06/05/99 17:04 H100 RING 00:02

DID call is disconnected while it is being transferred from STA 100

to STA 102.

G: Incoming call to hunt group, but the caller

hangs up before answer

H: 1. Answered incoming call was transferred to

another extension, but the caller hangs up
before answer.

2. Incoming call placed on hold state and

cleared down in hold state.

R: Direct call (DID) to a station, but the call was

disconnected before the station answers. Or

direct call to station (A), but station (A) does
not answer and the call was forwarded to

station (B). The call was disconnected before

station (B) answers.

Operation

To print the lost call count of record,

1. Press the

[TRANS/PGM]

button.

2. Dial

0117

at Attendant station.

3. The lost call count of record is printed in the

PC connected in the system.

To clear the lost call count of record,
1. Press the

[TRANS/PGM]

button.

2. Dial

0118

at Attendant station.

3. “The lost call count is cleared” is printed and

the lost call count time is restarted.

Admin Programming

SMDR Print Enable (PGM 177-BTN 2)

SMDR Recording Call Type (PGM 177-BTN

Print Lost Call (PGM 177-BTN 6)

Condition

1. This SMDR record is sent to RS-232C

automatically as soon as the event takes

place.

2. The SMDR record about lost call is not saved.

Only the records are counted.

3. To activate this SMDR record, the SMDR field

Содержание LDK24 ADSL Router





































































































Результаты поиска

Содержание LDK24 ADSL Router

Отзывы:

LG LDK24 ADSL Router, Руководство по программированию, Страница: 66 / 100

Результаты поиска

Содержание LDK24 ADSL Router

Отзывы: