LG LDK24 ADSL Router Скачать руководство пользователя страница 76

Страница: 76 / 100

Programming Manual for Digital Key Telephone System

LDK-

300 & LDK-100

System Features

3-31

3. Station Number prompt is heard.

To hear Station Status prompt,

1. Press the

[TRANS/PGM]

button.

2. Dial

6 4

3. The following items are reported for station

status.

1) Station Number
2) Intercom Answer Mode

3) Listed Messages (the

number of

message waiting)

4) Wake-up Time

5) Do Not Disturb

6) Forwarded to Station xxx
7) Forwarded to Speed bin xxx

8)  Queued CO xxx
9)  Locked (Temporary COS change)
10)  COSx

(From 3 to 9 may be omitted if not set)

User Greetings & Voice Message Wait

Description

If the access to the VMIB is allowed, user can

record User Greeting and make a call be

forwarded to VMIB port according to forward
condition type if user enables forward. And the

caller can leave a voice message wait at the

station after hearing user greeting.

Operation

To record a user greeting at a station,
1. Press the

[TRANS/PGM]

button.

2. Dial

6 1

Dial the message number. Then you will hear

the announcement “

Press # button to record

”

If there is already a recorded message in the

number dialed, the recorded message will be

played.

Dial

to start recording. Start the recording

after hearing the announcement “

Record

your message

” and confirmation tone.

Press the

[HOLD/SAVE]

button or the

[MON]

button to finish the recording. Then

confirmation tone is heard.

To delete a user greeting at a station,

1. Press the

[TRANS/PGM]

button.

2. Dial

6 6

3. The user greeting is deleted and forward is

deactivated.

To activate call forward to VMIB from a station,

1. Off-hook or press the

[MON]

button.

2. Press the

[DND/FOR]

button.

3. Dial the forward type (1~4).

4. Dial

key.

5. Confirmation tone is heard.

To deactivate call forward to VMIB from a station,

1. Press the

[DND/FOR]

button.

To leave voice message wait,

1. The caller will hear user greeting and “Record

your message” announcement.

2. After beep tone, record your own message

with normal voice.

3. Hang up to finish the recording.

To retrieve recorded voice message wait,

1. Press the flashing

[CALLBK]

button. For SLT

and 2/8 BTN keyset, dial 557(Message

Wait/Callback Return).

2. The message number prompt is heard and

the first voice message and Time & Date

prompt for the message is played.

3. Pressing the

[CONF]

button, the current

message is deleted and the next message is

heard. For SLT and 2/8 BTN keyset, dial #1.

4. Pressing the

[HOLD/SAVE]

button, the

current message issaved and the next

message is heard. For SLT and 2/8 BTN

keyset, dial #2.

5. Pressing the

[CALLBK]

button, the current

message is played again. For SLT and 2/8

BTN keyset, dial #3.

Admin Programming

VMIB Access (PGM 113-BTN 2)

VMIB Forward No Answer Timer (PGM 181-
BTN 1)

VMIB User Record Timer (PGM 181-BTN 3)

VMIB Valid User Message Timer (PGM 181-
BTN 4)

VMIB MSG PASSWORD (PGM 113-BTN 8)

VMIB MSG DD/TM (PGM 113-BTN 9)

Содержание LDK24 ADSL Router





































































































Результаты поиска

Содержание LDK24 ADSL Router

Отзывы:

LG LDK24 ADSL Router, Руководство по программированию, Страница: 76 / 100

Результаты поиска

Содержание LDK24 ADSL Router

Отзывы: