Programming Manual for Digital Key Telephone System
LDK-
300 & LDK-100
CO Line Features
1-16
2.
Press the programmed key for { MEMO-
TEL Interrogation Code}, or [FLASH] key
+ [2] + [8] for Normal activation.
3.
Service accepted by PX and you will
hear announcement about the current
memotel activation type and applied
timer. Or service rejected by PX and you
will hear the announcement about wrong
access.
4.
When the station goes to on-hook state,
normal LCD will be displayed.
Retrieve of MSRS
1. Press the
{CO}
key.(Attendant only.)
2. Press the programmed key for
{MEMO-
TEL Retrieve MSRS Code
}, Or
[FLASH]
key +
[2]
+
[9].
Then you will
hear announcement to enter password
or if rejected announcement about
wrong access.
3. Dial Password and # for identifying
your password.( Password in 4 digits.)
4. Dial desired code according to PX
announcement.
Condition
1. Memo-Tel is only available in national
keypad protocol.
2. If this feature is activated by attendant
station (access basis), then the ISDN
lines are in MEMO-TEL mode. To
retrieve stored message or enquiry of
service status at attendant station,
attendant should to retrieve of MSRS or
enquiry of status for all CO lines
respectively.
3. If this feature is activated by normal
station (number basis), then the first CO
line for this station in MSN table is in
MEMO-TEL mode. So, the user should
be assigned with the specific subscriber
number and co number to MSN table.
If no co number is assigned to MSN
table, system will choose the first co as
default. To retrieve stored message or
enquiry of service status at normal
station, normal station need not to
access CO line.
4. To know service status, user should be
inquire of service status to PX using
‘Enquiry of service status service’.
5. Station when having numbers for not
only one co line the first one appearing
in the MSN table will be chosen.
LAST NUMBER REDIAL (LNR)
Description
The last dialed number with CO line can be
stored (up to 48 digits) in the station's Last
Number Redial buffer. The user may request the
system redial the last number without redialing
the full number. Each keyset with LCD in the
system has 10 individual last dialed number
directory.
Operation
To use Last Number Redial,
1. Lift the handset or press the
[MON]
button.
2. Press the
[REDIAL]
button.
Or, press the
[SPEED]
button and dial *.
3. Press
[HOLD/SAVE]
button.
To use one of dialed number in the Last Number
Directory by scrolling (only for keyset with LCD),
1. When last dialed number is displayed, press
[UP]
or
[DOWN]
button to find a phone
number. (Max. 10 last dialed number can be
stored in the directory.)
2. To make a call, press
[HOLD/SAVE]
button
when the phone number is displayed.
Condition
5. When the used CO line is busy, an idle CO
line in the group is seized and the last dialed
number is dialed.
6. The last dialed number directory allows a
duplicated phone number.
If you use Last Number Redial while the Auto-
redial is activated, the auto-redial is canceled.
MUSIC ON HOLD (MOH)
Description
When a CO line call is placed in the hold state
(system, exclusive, transfer, conference, etc) the
external party will hear music. In this way, the CO