LG AMNW07GSJL0, Данные о продукции

Страница: 319 / 443

2
MULTI/SINGLE
Indoor unit
Ceiling Concealed Duct - Middle Static Pressure
1. List of functions
 List of function
Category Functions
ZBNW18GM1A1 [CM18F N10] ZBNW24GM1A1 [CM24F N10]
ZBNW30GM1A1 [UM30F N10] ZBNW36GM2A1 [UM36F N20]
ZBNW42GM2A1 [UM42F N20] ZBNW48GM3A1 [UM48F N30]
ZBNW60GM3A1 [UM60F N30]
Air flow
Air supply outlet 1
Airflow direction control (left & right) X
Airflow direction control (up & down) X
Auto swing (left & right) X
Auto swing (up & down) X
Airflow steps (fan/cool/heat) 3 / 3 / 3
Chaos wind(auto wind) X
Jet cool/heat X / X
Swirl wind X
Air purifying
Triple filter (Deodorizing) X
Air purifier (Plasma) X
Air purifier (Ionizer) X
Allergy Safe filter X
Long-life prefilter (washable / anti-fungus) O
Installation
Drain pump O (Accessory)
E.S.P. control* O
Electric heater X
High ceiling operation* X
Reliability
Hot start O
Self diagnosis O
Convenience
Auto changeover O (Single Only)
Auto cleaning O
Auto operation(artificial intelligence) O (Multi Only)
Auto Restart O
Child lock* O
Forced operation X
Group control* O
Sleep mode O
Timer(on/off) O
Timer(weekly)* O
Two thermistor control* O
Auto Elevation Grille X
Special Functions
Wi-Fi O (Accessory)
Comfort Coolng (Humidity Control) X
Wireless Remote Controller O (Accessory)
Wired Remote Controller O (Accessory)
Network Solution(LGAP) O
Note
1. O : Applied, X : Not applied, Embedded : Included with product.
Accessory : Ordered and purchased separately the accessory package referring to the model name provided and install at field.
Accessory line-ups varies by region, so check your local catalogue or local sales material.
2. Some functions can be limited by remote controller.
3. Selecting a wireless remote controller in case of ducted type indoor units requires either a connection to the wired remote controller (
Standard II
) or
an IR receiver accessory to be connected to the duct in order to receive the signal.
4. * : These functions need to connect to the wired remote controller.
5. ** : It is included by default when the product is manufactured.
6. *** : This functions need to connect to the Standard III wired remote controller.