LG AMNW07GSJL0, Данные о продукции

Страница: 213 / 443

8. Installation
15
MULTI/SINGLE CAC
Indoor unit
ART COOL
8.3 Connection of piping
• Preparing the indoor unit's piping and drain hose for installation through the wall.
1.
Route the indoor tubing and the drain hose in the direction of rear left or right
2. Tape the tubing, drain hose and the connecting cable. Make sure that the drain hose is located at the
lowest side of the bundle. Locating at the upper side can cause drain pan to overflow inside the unit.
Note
• If the drain hose is routed inside the room, insulate the hose with an insulation material* so that dripping from
condensation will not damage furniture or floors.
• Foamed polyethylene or equivalent is recommended.
̰
Connecting the installation pipe and drain hose
1. Align the center of the pipes and sufficiently tighten the flare nut by hand.
2. Tighten the flare nut with a wrench.
3. When needed to extend the drain hose of indoor unit, assembly the drain pipe as shown on the drawing.
Drain hose
Loop
Connecting
pipe
Power cable
Transmission
cable
Tape
Drain hose
Indoor unit tubing Flare nut Pipes
Wrench
Indoor unit tubing
Open-end wrench
(fixed)
Connection
pipe
Flare nut
Vinyl tape(narrow)
Adhesive
Drain pipe
Indoor unit drain hose