background image

 

 

  

 

YMGI: Your Modern Green Idea

 

INSTALLER'S INSTRUCTION & USER'S MANUAL 

Wall Mount Mini Split Systems 

SYMPHONY CHOIR DC INVERTER DUAL ZONE (46)2 

2x09k and 2x12k, 15 SEER Cooling and Heat Pump

 

 

Model Numbers:

 

System: 
WMMS-2x09K-V2B(46)2 
IDU: 
WMMS-09EW-V2B(46)2 
ODU: 
WMMS-21CH-V2B(46)2 
 
System: 
WMMS-2x12K-V2B(46)2 
IDU: 
WMMS-12EW-V2B(46)2  
ODU: 
WMMS-24CH-V2B(46)2 

 

 

Thank you for choosing this YMGI product. Please read the owner’s manual carefully before installation and operation and retain for your 
records and future reference. If you need a replacement copy, please contact your local agent or visit www.ymgigroup.com to download 
a current electronic version. 

NOTICE

 

This  product  is  designed  and  manufactured  to  be  free  from  any  defects  in  material  and  workmanship  during  normal  use  and 
maintenance. Installation, operation, maintenance and repair must follow all  standards and professional practices for regular cooling 
and heating equipment, such as NEC, State, or Local Codes and all related documents/manuals provided by YMGI. Failure to follow 
and adhere to all codes and documentation can cause damage to equipment, property even personal injury. 

Installer

: Currently licensed/certified HVAC technicians only. Must Read the manual and all provided documents prior to installation.   

Complete and fill out all required information on the warranty registration card. 

User

: Retain this manual and all supplied documents for your records and future reference. 

Servicer

: Use this manual for information concerning servicing and maintenance of this product.

 

SAFETY WARNING

 

Only qualified technicians should install and service this equipment. The installation, startup, operation and servicing of this equipment 
can be hazardous and requires a HVAC professional who has been trained, licensed and certified. Installations, adjustments or any 
equipment alterations done by an unqualified person could result in serious injury and even death. When working on the equipment, 
observe all precautions in the provided documents, on the tags, stickers, and labels that are attached to or placed on the equipment.

 

Содержание SYMPHONY CHOIR WMMS-2x09K-V2B(46)2






















































Отзывы: