LG 55EW960H Скачать руководство пользователя страница 39

Страница: 39 / 89

206-4307

Installer Menu (Cont.)

•

201 Automatic Static Back Lighting: The TV automatically

controls back lighting by using Intelligent Sensor to detect the

level of ambient lighting.

•

202 Automatic Dynamic Back Lighting: The TV automatically

controls back lighting by using Intelligent Sensor to detect the

level of ambient lighting and depending upon the picture level

of the current program.

If set to 201 or 202, back lighting can be controlled via the Picture

settings in the TV setup menus. However, each time the TV is

turned ON, Picture Mode (set in Picture Menu) is defaulted to

Intelligent Sensor. If Picture Mode is manually set to a static option

(Vivid, Standard, etc.) during a viewing session, Intelligent Sensor

is temporarily disabled.
If set to 255, back lighting is controlled via the Picture settings in

the TV’s setup menus.

101 - IR FEEDBACK

If set to 0 (default), the TV’s MMR (Magic Motion Remote) feature

is enabled, and a compatible LG MMR may be used with the TV. If

set to 2, the MMR feature is disabled.

Note:

The Installer Remote shipped with the EW960H TV models

supports MMR operation. However, see item 098 PRO:CENTRIC

note regarding

compatibility if you intend to configure the TV for

GEM Mode.

102 - ATSC BAND

Sets up TV to receive different types of incoming signals:
0 = Broadcast

1 = CATV

2 = HRC

3 = IRC

4 = Same as NTSC

103 - ATSC TUNE MODE

Sets ATSC tuning mode. Default set to 1 for Physical Channel

scan. Set to 0 for Virtual Channel scan.

104 - START MINOR CHANNEL

Sets Minor Start Channel number at power up. 0 = NTSC. If not

0, number selected is the digital channel’s Minor Start Channel

number.

Note:

This item is not available in the Installer Menu when item

004 STRT CHANNEL is set to 0 or 255.

106 - ASP RATIO LOCK (Aspect Ratio Lock)

Set to 1 to retain previous aspect ratio with power off. Set to 0 to

retain default aspect ratio with power off. See item 096 DEF. ASP.

RATIO above.

107 - BANNER SELECT

Selects the type of banner to display during channel change.

Set to 1 for channel label display, plus channel information (full

banner). Set to 0 for channel label display only (small banner).

116 - VIDEO MUTE EN (Video Mute Enable)

Applicable for analog channels only. If set to 1, video mutes

(blank screen) when no signal is present.

117 - FACT DEFAULT (Factory Default)

Set to 1 and press the Wheel (OK) button to restore the factory

default settings of all Installer Menu items. Once complete, the

value returns to 0.

Caution:

If set to 1, this clears all Installer Menu custom

settings and restores the factory default settings. It also

clears the channel lineup, including any assigned

channel icons and custom text labels.

Note:

See also Reference section, “Restoring Factory Defaults on

the TV(s),” for further information.

119 - DATA CHANNEL

Set to 0 to disable. Set from 1 to 135 to match the RF channel

number that will be used by the Pro:Centric server as its data

channel. If left at the default value (255), the TV’s Data Channel

Auto Search feature will be enabled (see additional information

below).

Data Channel Auto Search feature: When this item is set to 255

(default), once every 24 hours, the TV will initiate a search of 10

predefined channels (10, 20, 30, ... 100) and then, if necessary,

perform a complete search of the RF channels (1 to 135) in an

attempt to find the RF channel used by the Pro:Centric server as

its data channel. If the Pro:Centric RF channel is found, the DATA

CHANNEL value will be changed from 255 to match the server’s

RF channel number. The time at which the Auto Search occurs

depends on the setting of item 121 UPDATE TIME HR. See item

121 description for further information.

Note:

Pro:Centric updates are downloaded from the Pro:Centric

server to the TV when the TV is turned OFF. While Pro:Centric

updates are in progress, it is not possible to turn ON the TV.

Note:

The Data Channel is automatically set to “253” if Media

Type is set to “IP” either in the EZ-Manager Wizard or in the IP

Environment / Pro:Centric Menu on the TV (see “EZ-Manager

Wizard” on pages 16 to 25 or “Pro:Centric Setup” on pages 60 to

62, respectively) or if Installer Menu item #119 Data Channel is

set to “IP Address” in the FTG File Manager, which is used to

configure TV CPUs for FTG Mode operation. It is not possible to

change the value to “253” directly in the Installer Menu.

PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies.

Содержание 55EW960H


























































































Результаты поиска

Содержание 55EW960H

Отзывы:

Похожие инструкции для 55EW960H

Бренды по названию

Популярные бренды

LG 55EW960H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 55EW960H

Отзывы:

Похожие инструкции для 55EW960H

Бренды по названию

Популярные бренды