LG 55EW960H Скачать руководство пользователя страница 20

Страница: 20 / 89

206-4307

EZ-Manager Wizard (Cont.)

Configure Pro:Centric Settings

Once you select “NEXT

” from the TV Configuration Options screen, the Searching for Pro:Centric

Server screen is displayed.

Note:

Select the “BACK” button, where available, to check previous settings, as necessary.

SEARCHING FOR PRO:CENTRIC SERVER...

This step automatically searches for the Pro:Centric server.
If there is no Pro:Centric server installed, you do not need to continue with this procedure.
In this case, you can either select

in the top right corner of the screen to exit or select MANUAL

PRO:CENTRIC below to enter the Pro:Centric server settings manually.

Status: Tuning channel 30

TV is now searching the pre-defined channels for the data channel...

BACK

MANUAL PRO:CENTRIC

You have the following options:
•

You can allow the EZ-Manager Wizard to proceed with a series of automated steps to configure

the TV for Pro:Centric operation and then to look for the Pro:Centric application and maintenance

(E-Z Installation) files to download. In this case, the wizard uses a search algorithm to determine

the Data Channel and the Pro:Centric Application Mode to set in the TV.

Continue with the “Automated Pro:Centric Configuration” subsection below.

• If you already know the settings (e.g., Data Channel and Pro:Centric Application Mode) that need

to be configured in order for the TV to connect to the Pro:Centric server and/or if the Pro:Centric

server is not yet installed, you may expedite the setup process by entering this data manually.

Continue with the “Manual Pro:Centric Configuration” subsection on page

22.

Automated Pro:Centric Configuration

Note:

If the server is not yet configured on the system, use the manual configuration option to

configure the Pro:Centric operation. See also note below.

Note:

If Pro:Centric data delivery will be over IP and there is a DNS server at the site, you can

create a DNS entry “procentric.local” for the Pro:Centric server that will enable automated

Pro:Centric IP configuration via the EZ-Manager. If there is no DNS entry for procentric.local, you

must use the manual configuration option to configure the Pro:Centric IP operation.

Once the Pro:Centric data channel is found (a Pro:Centric Server Was Found screen will be

displayed) and the Pro:Centric Application Mode is determined, the wizard will advance to the

Processing the Pro:Centric Configuration screen, which shows the progress of the data

downloads (see example on following page). Note that some steps may require a few minutes.

(Continued on next page)

Содержание 55EW960H


























































































Результаты поиска

Содержание 55EW960H

Отзывы:

Похожие инструкции для 55EW960H

Бренды по названию

Популярные бренды

LG 55EW960H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 55EW960H

Отзывы:

Похожие инструкции для 55EW960H

Бренды по названию

Популярные бренды