LG 55EW960H Скачать руководство пользователя страница 6

Страница: 6 / 89

206-4307

Commercial Mode Overview

This document describes how to set up EW960H Pro:Centric

TVs for Commercial Mode operation. LG

commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides

in the TV’s CPU or Protocol Translation Controller (PTC), or it resides in a Pro:Centric application or an

external device from the solution provider.
These TV models support several different operational modes: LG’s Free-To-Guest (FTG) Mode via the TV

CPU, Application Tuning Mode (ATM) with Pro:Centric application, or Pass-through Mode (default). When

in Pass-through Mode, these TV models can also be externally controlled via Multiple Protocol Interface

(MPI) or TV-Link Monitor (TLM) interface (RS-232C).

Setup Checklist

Note:

This document provides information specific to Commercial Mode operation. Refer to the Owner’s

Manual and/or Easy Setup Guide for information on TV installation and hardware and cable connections.

Installation

__ Unpack TV and all accessories.

__ Install batteries in the Installer Remote.

__ Install TV on VESA mount or stand.

Note:

It may be advisable to make all cable

connections before installing on VESA mount

or stand, as appropriate.

Hardware Connections

__ Install any additional hardware as

appropriate to your institution, LAN, etc.

Cable Connections

__ Make all rear jack panel connections, as

appropriate.

Commercial Mode Setup

__ Complete appropriate procedures as described

in this document for Commercial Mode operation.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode operation. This mode

also allows external control via either the MPI port or the TLM (RS-232C) port on the TV rear jack panel.
There are two methods for configuring individual TVs that are currently in Pass-through Mode: either

using the EZ-Manager Wizard or the Custom Master TV Setup procedure as described in this document.

EZ-Manager Wizard

When the TV is in a factory default state, the EZ-Manager Wizard provides automated or manual options

for configuring essential items for Pro:Centric operation and also provides an option for using a USB

memory device to configure the TV.

Use the Installer Remote to make selections and complete each step.

See “EZ-Manager Wizard” on pages 16 to 25 for detailed information.

Custom Master TV Setup

The Custom Master TV Setup procedure enables you to create a customized Master TV Setup for

Pass-through Mode or FTG Mode configuration purposes. Use the Installer Remote to c

onfigure Installer

Menu items as required for TV operation and set up TV features (Channel, Picture, Sound, etc.). See

“Custom Master TV Setup” on pages 41 to 43 for detailed information.

Содержание 55EW960H


























































































Результаты поиска

Содержание 55EW960H

Отзывы:

Похожие инструкции для 55EW960H

Бренды по названию

Популярные бренды

LG 55EW960H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 55EW960H

Отзывы:

Похожие инструкции для 55EW960H

Бренды по названию

Популярные бренды